3 Tiered Cedar Corner Planter
37W x23H x25D

Go back to related product list

Wrought iron brackets used to hang three way planters.

Go back to related product list

The Muskoka Chair is a slightly smaller version of the Original Bear Chair. It has all the comforts and quality of the Bear Chair but a smaller frame for the smaller individual. This chair makes a wonderful addition to your yard or patio and will last for years to come. Finish it any shade your deck or patio requires, the quality northern wood of the Bear Chair will effortlessly accept any stain.

The world famous Bear Chair has been an innovator in outdoor comfort and design. The Original Bear Chair is the offspring of intelligent and responsive modification to the classic design of the Adirondack \ Muskoka chair. Every Bear Chair product is packaged in a “Kit”. Each kit comes complete with precision cut, sanded and pre-drilled pieces, easy to follow instructions and all necessary hardware for a one screwdriver assembly procedure. All are encased in tight fitting, fully labeled cartons.

Assembled Size: 35"x28"x33"
Approximate Assembly Time: 1 Hour

Before Assembly
1. Make sure you remove all parts form carton.
2. Familiarize yourself with the various parts while reading the instructions thoroughly.
3. Give yourself plenty of space, making sure the complete chair can be moved from the room.
4. Follow the step by step instructions to ensure easy assembly.
5. We recommend gluing all joints for a long lasting chair. Wood glue or carpenter’s glue works fine.

Click here to view a flash presentation of the chair assembly

A Word about Northern White Pine The white Pine in this furniture was harvested in Northern Ontario. Pine must have a protective finish applied, if left unfinished it will discolor and crack as it dries. Some surface checking may occur due to changing moisture levels but this is typical for a natural product and will not affect the durability.

Finishing White Pine For the best finishing results use a good quality exterior stain or paint. You should follow all the manufacturer’s directions, including an initial light sanding with 120 grit sandpaper.
We do not recommend using straight spar varnish or varathane-they may look great initially but will weather very quickly and require frequent re-coating. Stains like “Sikken’s Cetol 1” provide excellent and long lasting protection.
It’s a good idea to consult your local paint or stain retailer for advice on the best finish for your geographic location and usage.

Go back to related product list