Apollo: 1500, 1600, 1550, 1650, 3500ETL, 3600ETL, 7000UL, 7500ETL, BA-12 (must be equipped with the Estate Swing 433ESREC Transmitter)
Other: Estate Swing 433 MHz Receiver wired into any other device.
Note: If you use the Estate Swing 433ESREC transmitter, then this keypad WILL be compatible. You must use the 433ESREC transmitter in your system in order to use this keypad.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
The Estate Swing wireless 4-channel digital keypad is a must-have for every gate opener. It can store 4 access codes, each sending a uniquely coded signal. This is important because each code can independently control its own device, or all 4 can control the same gate. Use the codes for family, friends, lawn services, deliveries, etc., or assign them to the gate, pedestrian gate, garage, or daytime-only access.
Some possibilities are as follows:
Each Estate Swing receiver comes with two channels. The first channel is used by the gate opener to open and close the gate; the second channel is available for other uses. For example, if you purchase a timer, you could wire the second channel to the timer and have that channel active only during business hours. You can program one access code to trigger channel 1 and open the gate at any time, while programming a second code for channel 2 to allow access only during business hours.
If your garage is within 200 feet of your gate, you could add an Estate Swing receiver to the garage door opener. Then, you could program one access code for the gate and another for the garage door.
If you have a pedestrian gate with an electric lock, you could add an Estate Swing receiver to the lock kit. This would allow you to release the lock through the same keypad as the gate opener.
Alternatively, you can program multiple codes to the receiver that comes with your Estate Swing. Keep one code for family members, which you know will never need to change, and use the other codes for deliveries or lawn services. If you need to change one of them, your family members won’t need to memorize a new code.
During night hours, after a key is pressed, the keypad illuminates with a bright yet attractive blue LED. The LED will remain lit while the keypad is in use, then turn off to conserve battery power.
An additional popular feature is the single-digit secondary transmission. After entering an access code, you can press any numerical key on the keypad within approximately 20 seconds to send a second signal. This is useful if you need to stop or reverse the gate because it is about to hit an obstacle.
The residential keypad housing is made of UV-protected black ABS plastic. The buttons on the residential version are backlit in white when pressed. The keypad housing is constructed from hardened polymer and has a matte black finish. The keypad is surface-lit by a blue LED light when a key is pressed. Both versions are designed for easy mounting and blend well aesthetically with a keypad stand or can be surface-mounted to a column, fence, or garage door frame. They are completely weatherproof and require no hood or cover to protect them from the elements.
4 Channels: Control up to four devices with a single keypad
Long range: 200+ foot wireless signal
Night Use: Keypad LED illuminates when numbers are pressed
Battery Powered: Requires a 9V battery (lithium battery recommended) not included
Secure: Locked to mounting plate, requires specialized provided tool for removal
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Words from Senior Application Engineer, Anthony Gaeto
“The Estate Swing 433MHz 4-Channel keypad, comes with your choice of housing. This keypad has the capability to be learned wireless with an Estate Swing 433MHz receiver. The receiver has two separate channels built in. The first channel controls the opening and closing of your gate opener, and the second channel can be in conjunction with a timer to give codes that are only able to operate the gate opener during business hours or other time parameters. The residential housing features a ABS black plastic body that is UV protected, which will keep this keypad looking great for years to come. The keys on this keypad are lit by upper LED and will come on once a key is pressed. The Residential grade housing is made of all metal and features a stainless steel faceplate as well as stainless steel buttons.
This unit features a built in LED bulb that will illuminate the keys during use. One nice feature of the Estate Swing keypads, is the capability of being able to send a secondary digit transmission to the receiver. After you enter your entry code, you will be allowed to press a single numerical key to either stop or reverse your gate. This window lasts for 20 seconds for a secondary transmission. This is helpful in the case that someone enters the path of the driveway gate. If you need any help with the programming of your Estate Swing keypad, please watch this video or give us a call, send us a email, or use our live chat. Gate Crafters has experts standing by to help you out with any question you may have. We are available 7 days a week from 9 am to 9 pm, eastern time. We look forward to hearing from you”
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The Gate Crafters sensor is a multipurpose exit sensor and vehicle detector that allows hands free access; and, because of its simple design, it is compatible with most gate openers including the Estate Swing, Apollo, Zareba, and many others. The single piece design provides the installer with a simple installation procedure. The Gate Crafters Exit Sensor is buried in the ground so a potential intruder or vandals do not notice it. The Gate Crafters have a wide range of power supply options from 9V to 41V AC or DC. Low current consumption makes it an excellent choice for solar power applications.
The Gate Crafters sensor uses a passive probe sensor to detect changes in the earth's magnetic field. These changes are caused by a movement of ferrous metal objects such as a car in the proximity of the probe. The sensing area of each probe is in the shape of about 15-foot circle. The size of this detection circle changes with the size and speed of the moving car. The Gate Crafters sensor can be buried in the ground about 6 inches deep parallel to the paved driveway. It also can be placed 2 inches deep in asphalt or concrete under the path of the vehicle.
Note: Exit wands/sensors should not be used on properties in which the driveway gate is designed to keep in pets, children or livestock due to the possibility for unintentional openings. Our suggestion is to use a keypad for exiting so the gate will only open when it is intended to by code.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Access Control: Can be used as a free exit vehicle detector for gates, overhead doors, and parking barriers.
Safety: Can be used to detect moving vehicles in an environment where there are blind areas along the driving path and actuates warning lights.
Energy Conservation: Can be used to detect moving vehicles along a driving path or driveway and turn lights on only in the proximity of the vehicle.
Security: Can be used to detect approaching vehicles or an unauthorized movement of a parked vehicle and actuate alarms, video cameras or vehicle annunciators.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
The exit wand is available with the following amount of lead wire. You may not extend the wire. Choose your desired option above.
50' Lead Wire
100' Lead Wire
150' Lead Wire
200' Lead Wire
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Use this formula to calculate how far from the gate the loops should be placed so that by the time a car reaches the gate, the gate will be completely open:
Exit Loop formula: x*(y*1.46)=z
x = time for gate to open in seconds.
y = Desired MPH to reach gate.
z = how far from gate.
FYI - 1.46 converts miles per hour to feet per second. We also recommend adding in 10 to 20 feet so the gate is fully open at a comfortable distance
from the
gate.
For placement of a safety loop before and after the gate use the formula below. A safety loop is designed to stop the motion of the gate before the
car reaches
the gate. The distance below should give an ample amount of time for the gate to stop before hitting a vehicle:
Safety Formula: 4 feet before a closed gate and after an opened gate.
Words from Senior Application Engineer, Anthony Gaeto
“We are always getting questions about how gate exit wands work and how they are different from exit loops.
Exit wands are what is know as a magnetometer which senses changes in the Earth’s magnetic field. An easy way to explain how exit wands work is to picture a boat traveling through the water. As the boat is traveling it is creating waves. As your car travels through the magnetic field of the Earth it creates similar waves, like the boat. The exit wand’s magnetometer picks up on these waves as you travel by the wand. One downside of exit wands is that they do lose sight of your vehicle when it is stopped.
Gate Crafters carries 5 different types of exit wands that work very similar to each other. The only difference between these wands is some of their features. The GTO/PRO wireless exit wand is wireless between the magnetometer and receiver. The Gate Crafters exit wand is manufactured by EMX and has been around for years. The GTO exit wand is recommended for use with other GTO openers and accessories. The Estate Swing exit wand does come with a range control board that allows you to adjust the sensitivity of the magnetometer. This feature allows you tune down the range of the exit wand so that vehicles such as a lawnmower don’t set open your gate, but this isn’t a complete failsafe, as it will still operate the gate opener when something is nearby. The Estate Swing Deluxe Exit wand is the most different from the other exit wands. It is constructed out of copper and features a ground cable that attaches to a grounding rod that helps protect this exit wand from lightning strikes. The other 4 exit wands do not have this feature and are susceptible to damage from lightning strikes. Also, the Estate Swing Deluxe Exit Wand comes with a 5 year warranty, which is longer than any other exit wand we sell.
Exit loops differ from exit wands in that they are buried in the driveway in a loop and are wire to the gate opener. The way exit loops work is that they detect the presence of metal (your car) above the loop. It does not matter if your car is moving or not, the loop will detect the car. Besides being used to exit your property, exit loops are used for safety. When exit loops are used as a safety device, they will prevent your gate from closing on your car, when they detect a car nearby to your gate. The exit loop is wired to an exit loop detector, which is then wired into your gate opener’s control board.
GateCrafters.com is a one stop shop for gate openers and gate accessories at a great price. Gate Crafters was started on the idea of providing gate openers and accessories along with great customer service to our valued customers. We have technical support available to you 7 days a week from 9 am to 9 pm, eastern time. Our experts are standing by to take your phone call, answer your email, or chat with you with our live chat on our website. We welcome any question you may have and can help you put together a complete package for you so your gate operates how you want it to. We look forward to hearing from you.
From the innovative brand Estate Swing, known for its dependable gate automation, comes the new eye-catching and affordable Estate Swing Driveway Gate Collection. Featuring an elegant sweeping arc and clean lines, this 14 foot long single gate is functional in both appearance and automation. The design incorporates classic artistry, sturdy wrought aluminum alloy, and a smooth powder-coated finish.
Unlike other driveway gates where automation is an afterthought, Estate Swing recognized the importance of operator placement from the start. Customer automation preferences were considered beforehand, preventing the need for awkward and structurally unsound flat bars to be added later. See “Gate Construction” below for more details on how other gate companies fail to provide proper automation support.
Using 6061-T6 wrought aluminum with ¾ inch pickets and full 2 inch square frame members, we create a tough, durable gate that is stronger, lighter, and nearly twice as resistant to denting or bending as steel. This makes it safer for people and objects and extends the life of the operator by reducing strain on its gears. As gate automation professionals, Estate Swing anticipated consumer needs and incorporated those details into the design of this dynamic driveway gate. It’s easy to drill, easy to lift, and easy to automate, keeping both DIY installation effort and costs down significantly.
Another unique feature of our Estate Swing Driveway Gate Collection is that it’s made in the U.S. by skilled welders who follow the American Welding Society's standards. Local manufacturing allows for efficient quality control and much faster shipping compared to overseas outsourcing.
With all these features and benefits, another company would charge much more. But thanks to our special relationship with Estate Swing, Gate Crafters is passing the savings on to you! Our loyal customers have long requested affordable security, and now, a well-designed driveway gate has never been more accessible or more affordable.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Each Estate Swing Garden Gate comes standard with finials and end caps, as shown in the image above. However, you have the option to upgrade the finials (replacing the standard ones) by selecting from the related items. Additionally, the price is for the gate only; bolt-on hinge plates and posts are sold separately.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
The Estate Swing Garden Gate is supported by a full frame and a complete set of thicker-than-average pickets. Many customers wish to lock and/or automate their garden gates, so Estate Swing has designed the gate panel to easily accommodate these needs.
The Estate Swing Garden Gate is crafted from 6061-T6 wrought aluminum alloy and is powder-coated for a protective seal and uniform color. The 6061-T6 wrought aluminum is a high-grade alloy with a yield strength of approximately 40,000 pounds per square inch*. In comparison, this is significantly stronger than "mild steel," which has a yield strength of around 20,000 to 30,000 pounds per square inch. Additionally, aluminum will not rust. 6061-T6 wrought aluminum is chosen for its durability, resiliency, dent resistance, and lasting beauty.
Powder coating is a process where powdered pigment is applied to and cured onto a surface. The surface is treated mechanically and/or chemically to remove impurities and contaminants, followed by the application of the pigments. The material is then cured at high temperatures, causing the pigments to flow together and chemically bond to form the coating. Powder coating is preferred for certain surfaces because it releases almost no volatile organic compounds (VOCs) and does not sag or run, even with thicker coats. The overspray can be recycled, which reduces waste, making it both cost-effective and environmentally friendly. Our Estate Swing Garden Gates are powder-coated to ensure the most uniform appearance possible.
Estate Swing Gates are powder-coated in the USA by a DuPont-certified powder coater.
DuPont coatings provide quality results through excellent transfer efficiency and premium coverage. As a trusted industry leader, DuPont's powder coating formulations offer environmentally responsible coatings that minimize waste while delivering a superior finish.
The certified powder coater for Estate Swing Gates has undergone rigorous testing and analysis to achieve DuPont Platinum Certification, making it one of only two companies in the U.S. to hold this prestigious honor. Every Estate Swing Gate features this durable, long-lasting DuPont powder-coated finish, resulting in an exceptional product line of high-quality driveway gates.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Words from Senior Application Engineer, Anthony Gaeto
"The Estate Swing pre-manufactured gates are readily in stock and available for shipment to your home or business. These gates come in various sizes, including 12 and 14 foot single leaf gates and 14 and 16 foot dual leaf gates. Each gate includes our standard finial, but you have the option to order custom ones from our website.
Estate Swing gates are built for automation, strength, and durability. The gates are made from strong 6061-T6 aluminum and are powder-coated to ensure long-lasting performance. The frame is constructed from 2 inch square 6061-T6 aluminum bars, providing a solid base to attach your gate opener and hinges. The frame and pickets are welded at multiple points by skilled American welders.
To complete your gate kit, we recommend ordering Gate Crafters' heavy-duty gate hinge kit. These durable hinges feature a grease fitting to keep the ball bearings moving smoothly. This kit is designed with the DIYer in mind, making the installation process easy and adding value to your home or business.
Gate Crafters pioneered the DIY gate business on the internet. We are committed to pleasing our customers by offering products that are simple to install. Our experts are available 7 days a week, from 9 AM to 9 PM Eastern Time, to assist you with any questions. We can create a complete kit that you can install yourself. Please feel free to call, email, or use our live chat on our website. We look forward to hearing from you!"
All Estate Swing Garden Gates come with a limited lifetime warranty. This warranty, provided by the manufacturer, covers structural integrity against defects in materials and workmanship.
With our detailed, easy-to-follow instruction manuals and 24/7/365 tech support, Gate Crafters has revolutionized the "Do It Yourself" process. Projects that once seemed difficult have been simplified with innovative products, superior tech support, customer service, and easy-to-follow instructions. No other retail store or website offers this level of commitment to supporting DIY customers. At Gate Crafters, we understand that your expectations as a customer extend beyond the actual sale, which is why we stand alone in demonstrating that our customers are our #1 priority.
*Shipping gates has always been a challenge due to their size and weight. Gate Crafters has developed a unique shipping accessory and process to ensure your gate arrives in perfect condition. After your gate arrives, the shipping accessory will need to be returned. Easy-to-follow instructions and a prepaid shipping label will be included to assist you with the return. A temporary $200.00 authorization hold will be placed on your form of payment by Web Direct Brands, Inc., and will be removed immediately once the equipment is returned.
“The Estate Swing 433MHz 4-Channel keypad, comes with your choice of housing. This keypad has the capability to be learned wireless with an Estate Swing 433MHz receiver. The receiver has two separate channels built in. The first channel controls the opening and closing of your gate opener, and the second channel can be in conjunction with a timer to give codes that are only able to operate the gate opener during business hours or other time parameters. The residential housing features a ABS black plastic body that is UV protected, which will keep this keypad looking great for years to come. The keys on this keypad are lit by upper LED and will come on once a key is pressed. The Residential grade housing is made of all metal and features a stainless steel faceplate as well as stainless steel buttons.
DuPont coatings provide quality results through excellent transfer efficiency and premium coverage. As a trusted industry leader, DuPont's powder coating formulations offer environmentally responsible coatings that minimize waste while delivering a superior finish.
