Related Product List:
|
|
|
|
LiftMaster Elite CSW200UL Single Swing Commercial Gate Operator Kit
31852,36312
Related Product Detail:
 |
|
 The E-S WED Solar-Powered Wireless Exit Device is a modern solution for automated gate control and vehicle detection, ideal for residential settings. Powered by an integrated solar panel and a long-life 6000mAh lithium battery, it eliminates the need for external wiring or frequent maintenance.
Unlike traditional wired loops, this ground wireless vehicle detector device uses advanced geomagnetic induction to detect metal objects, such as vehicles, within a 0.5-meter range. Upon detection, it transmits a secure 433.92 MHz ASK-modulated signal to your gate operator’s receiver, ensuring reliable and responsive access control. Designed for quick and simple installation, the E-S WED features a durable, waterproof ABS housing (IP67 rated) and mounts directly to the ground approximately 10 meters from the gate. LED indicators provide real-time feedback on operating status, signal transmission, and faults. Built-in buttons allow easy power control, device reset, and test signal activation for setup and diagnostics. Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Exit Device Only - Compatible with Estate Swing Openers ONLY Exit Device with Receiver - Compatible with ALL Gate Opener Brands
- Solar-Powered Operation: No wiring or trenching required, ideal for off-grid installations
- Wireless Connectivity: 433.92 MHz frequency with up to 20m transmission range
- Geomagnetic Detection: Senses vehicle presence using magnetic field changes
- Weatherproof & Durable: IP67-rated housing for reliable outdoor use
- Simple Installation: Mounts to flat surfaces using expansion bolts
- Low Maintenance: Weekly panel cleaning, quarterly signal testing, and annual battery checks
Gate Crafters has the resources you need.
How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener. |
- (1) Solar Wireless Exit Device
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor.
Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details. |
Go back to related product list |
 |
|
|
The Chamberlain Elite Safety Loop Detector is compatible with:
Elite CSW200UL Series
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Chamberlain Elite Safety or Exit Loop Vehicle Detectors are built to work exclusively with the Elite CSW200UL Series of gate openers. Elite detectors are made to plug right into terminal J8 on the bottom left of the Omni board. Once the wires from the loop are attached your Elite Safety or Exit Loop Detector is ready to go.
One of the features of the Elite Detector is the "FAIL" LED indicator. This particular indicator acts as a troubleshooting mechanism to let you know if there is a problem with the loop whether the loop circuit was shorted (3Hz Flash) or open (.5 Hz Flash), or any other issues with the loop.
Multiple Elite Safety or Exit Loop Vehicle Detectors can be installed in the same Gate Opener. Using the frequency switches, each device can be set at a different frequency so there is no interference. There is also a set of sensitivity switches so you can determine what vehicles will trigger the loop sequence.
Note: Changing the sensitivity setting will automatically reset the detector. Changing frequency only will not reset the detector. It is always necessary to reset the detector after changing the frequency setting.
|
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
|
Words from Senior Application Engineer, Anthony Gaeto
|
Top of Page
|
|
“We are always getting questions about how gate exit wands work and how they are different from exit loops.
Exit wands are what is know as a magnetometer which senses changes in the Earth’s magnetic field. An easy way to explain how exit wands work is to picture a boat traveling through the water. As the boat is traveling it is creating waves. As your car travels through the magnetic field of the Earth it creates similar waves, like the boat. The exit wand’s magnetometer picks up on these waves as you travel by the wand. One downside of exit wands is that they do loose sight of your vehicle when it is stopped.
Gate Crafters carries 5 different types of exit wands that work very similar to each other. The only difference between these wands are some of their features. The GTO/PRO wireless exit wand is wireless between the magnetometer and receiver. The Gate Crafters exit wand is manufactured by EMX and has been around for years. The GTO exit wand is recommend for use with other GTO openers and accessories. The Estate Swing exit wand does come with a range control board that allow you to adjust the sensitivity of the magnetometer. This feature allows you tune down the range of the exit wand, so that vehicles such as a lawn mower doesn’t set open your gate, but this isn’t a complete failsafe, as it will still operate the gate opener when something is nearby. The Estate Swing Deluxe Exit wand is the most different from the other exit wands. It is constructed out of copper and features a ground cable that attach to a grounding rod that helps protect this exit wand from lightning strikes. The other 4 exit wands do not have this feature and are susceptible to damage from lightning strikes. Also the Estate Swing Deluxe Exit Wand comes with a 5 year warranty, which is longer than any other exit wand we sell.
Exit loops differ from exit wands in that they are buried in the driveway in a loop and are wire to the gate opener. The way exit loops work is that they detect the presence of metal (your car) above the loop. It does not matter if your car is moving or not, the loop will detect the car. Besides being used to exit your property, exit loops are used for safety. When exit loops are used a safety device, they will prevent your gate from closing on your car, when it detect a car nearby to your gate. The exit loop is wired to a exit loop detector, which is then wired into your gate opener’s control board.
GateCrafters.com is a one stop shop for gate openers and gate accessories at a great price. Gate Crafters was started on the idea of providing gate opener and accessories along with great customer service to our valued customers. We have technical support available to you 7 days a week from 9 am to 9 pm, eastern time. Our experts are standing by to take your phone call, answer your email, or chat with you with our live chat on our website. We welcome any question you may have and can help you put together a complete package for you so your gate operates how you want it to. We look forward to hearing from you.
|
Single version
|
|
|
|
|
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
|
|
|
|
|
|
Go back to related product list |
|
