Related Product List:
|
|
|
|
Nice Apollo 7251 Commercial Post Mount Dual Slide Gate Opener with Free DIY Kit
35102,10449,31061
Related Product Detail:
 |
|
|
The Pair of Safety Photo Eye Mounting Posts are compatible with:
GateCrafters Safety Infrared Sensor "The Safety Egg"
Most Photo Eye Sensors
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Note: Photo eye on post in picture is not included. Purchase includes 2 posts, painted with caps.
Available in 2 optional heights: Car (30" tall) or Truck (36" tall). Constructed from durable 6060-T6 wrought aluminum (6060-T6 is a high-grade alloy with a yield strength of about 45,000 lbs. per square inch.) Comes with an attractive removable cap - finishes the post yet allows access to the inside for running wire and mounting of the photo eye. Wire can be run down through the photo eye stand, which is hollow to give a complete polished look to your home entrance.
The stand gets buried 6" in the ground. It is 2"x2" square and can be used for mounting any photo eye. (does not include mounting hardware for photo eyes or pre-drilled holes)
Each post comes in solid black to blend with any gate or landscaping theme. The primer/paint combination used by GateCrafters.com has been tested to withstand years of outdoor punishment. GateCrafters.com uses Marhide self-etching primer by Bondo. A self-etching primer is an essential undercoat layer of paint over aluminum. Primer kills stains, retards moisture and provides a good surface for a topcoat of paint to adhere to. It is imperative that new or bare metal and aluminum is primed prior to painting. Bondo is the producer of the top bare aluminum primers on the market. All gates are then top coated with Industrial Rust-Oleum brand enamel. Enamel is paint with finely ground pigments and a high binder content so that it dries to a hard finish. Enamels are mandatory to use on an aluminum surface because of its ability to affix to a highly smooth surface. Rust-Oleum is famous for providing long lasting surface and takes their legendary quality to a higher level in their industrial coatings.
|
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
|
Choose option above:
30" tall
36" tall
|
|
|
|
|
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
|
|
|
|
|
|
|
Go back to related product list
 |
|
The Oview/A display programmer is designed to program and control the automation of gates, garage doors, and road barriers. Any device within the NiceOne series that has a "BusT4" connector is compatible with this programmer.
Main features:
Program several devices connected on the same network
Control one or more automation
Enable diagnostics
Store settings and programmings (only when using the optional software)
***You may also directly connect the programmer to a device and have it wall-mounted with the 2m cable included with your purchase.
Install these optional accessory modules through the Oview software:
Bluetooth module - Connect Oview with a personal computer 10 - 15 meters apart from each other provided there are no obstacles within range (maximum distance is cut shorter in the presence of obstacles).
GSM module - Connect Oview with a personal computer, smartphone, or standard mobile phone. With this, you can send a command through call or text message as long as there is network coverage.
|
|
|
|
|
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
|
|
|
|
|
|
|
The Oview/A display programmer is only compatible with devices that have a "BusT4" connector such as the Apollo. The Nice Opera system consists of various transmitters, receivers, and control units that have that specific connector. Also, there are other software and hardware that work well with the programmer. They are the O-Box programming (transmitters and receivers), Oview programming unit (control units and receivers), a Bluetooth module, and a GSM module.
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Type: control, programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands, modification or parameters and monitoring of diagnostic data
Graphic interface: LCD display 128 x 64 dots (46 x 29 mm); 2,2”
Operator input device: joypad con 5 + 2 keys
Display/key lighting: white light
(colour coordinates: X = 0,29–0,33; Y = 0,30–0,34)
Calendar/clock: internal, with backup battery (minimum lifetime 10 years)
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Connection cable length:
- cable supplied: 2 m
- other cable: up to 700 m, measured from point to point
Power supply: supplied by devices present on BusT4
Absorbed current: Maximum 20 mA (without accessories)
Insulation: Class III
Casing protection rating: IP 20
(use indoors or in protected environments only)
Operating temperature: from –20°C to +55°C
Dimensions (mm): 107 x 61 x h 20
(with wall-mounting support: 125 x 70 x h 32)
Weight: 75 g (without cable)
Go back to related product list |
 |
|
Please note: Like most suppliers, we do NOT allow returns for electronic parts. Please make sure your item is compatible, or give us a call to make sure you get the correct product for your project. Thank you.
This is a replacement motor for the Apollo 7200 slide gate opener, as well as a retrofit kit for the Apollo 7000 gate opener. Use it to replace the motor in your 7200, or add it to your 7000 gate opener to upgrade it to a 7200 gate opener. A retrofit kit is a collection of parts and devices that can be used to update old equipment with new technology. GateCrafters.com offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
GateCrafters.com has the resources you need.
How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
Name: Nice Apollo 10029290: Retrofit kit, All 7000+ Series to Commercial Motor Manufacturer: Nice Apollo Gate Operators SKU: 10029290 This motor replaces old part number 30972S.
- Motor
- Gearbox
- Bracket
- Chain
- Sprocket
For over a decade GateCrafters.com has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future. |
GateCrafters.com is the DIY factor.
GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US. |
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
|
GateCrafters.com has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details. |
Go back to related product list |
|
| |
 |
|
|
|
Customer Service:1-800-997-6649 | Local:813-920-7259 (EST 9:00am-5:00pm)
|
|
