The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The OVBTGSM is the GSM module that allows your gate to be controlled by a simple phone call or text message. The product comes with a software package that needs to be installed in order for the device (PC, palmtop computer, or smartphone) to connect with the Oview module. The software allows for the Oview programmer to configure the network address, program the functions and set the parameters, show diagnostics of the state of operation, and control the automation.
Main features:
Connect to the automation of the gate operator by means of phone call or text.
Telephone call: "Voice" services commonly heard in telephone operators. There is no charge and the only limitation is whether or not the caller is available.
SMS Text messaging: Users can send commands through text messages. The charges vary depending on the telephone operator and the current rates.
A detailed and intuitive graphic interface through the monitor of your device.
Simpler navigation and data entry via the keyboard of the device
Create a database of modifications already programmed.
Performing diagnostics.
Able to update the device with new firmware releases of new functions
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
The Oview/A display programmer is designed to program and control the automation of gates, garage doors, and road barriers. Any device within the NiceOne series that has a "BusT4" connector is compatible with this programmer.
Main features:
Program several devices connected on the same network
Control one or more automation
Enable diagnostics
Store settings and programmings (only when using the optional software)
***You may also directly connect the programmer to a device and have it wall-mounted with the 2m cable included with your purchase.
Install these optional accessory modules through the Oview software:
Bluetooth module - Connect Oview with a personal computer 10 - 15 meters apart from each other provided there are no obstacles within range (maximum distance is cut shorter in the presence of obstacles).
GSM module - Connect Oview with a personal computer, smartphone, or standard mobile phone. With this, you can send a command through call or text message as long as there is network coverage.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
The Oview/A display programmer is only compatible with devices that have a "BusT4" connector such as the Apollo. The Nice Opera system consists of various transmitters, receivers, and control units that have that specific connector. Also, there are other software and hardware that work well with the programmer. They are the O-Box programming (transmitters and receivers), Oview programming unit (control units and receivers), a Bluetooth module, and a GSM module.
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
Type: control, programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands, modification or parameters and monitoring of diagnostic data
Graphic interface: LCD display 128 x 64 dots (46 x 29 mm); 2,2”
Operator input device: joypad con 5 + 2 keys
Display/key lighting: white light
(colour coordinates: X = 0,29–0,33; Y = 0,30–0,34)
Calendar/clock: internal, with backup battery (minimum lifetime 10 years)
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Connection cable length:
cable supplied: 2 m
other cable: up to 700 m, measured from point to point
Power supply: supplied by devices present on BusT4
Absorbed current: Maximum 20 mA (without accessories)
Insulation: Class III
Casing protection rating: IP 20
(use indoors or in protected environments only)
Operating temperature: from –20°C to +55°C
Dimensions (mm): 107 x 61 x h 20
(with wall-mounting support: 125 x 70 x h 32)
