The Apollo 1550 is a Gate Crafters specialty. With Gate Crafters' additions, this installer’s choice gate opener can be easily installed as a bolt-on application on any size post by the end user. It serves as the vehicular opener in the Apollo linear operator pair.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
Weight and length: Up to 16' in length and 600 lbs.
Max degree of opening: 110 degrees
Gate Post or Column size (pull to open): Max 8" x 8" post or gate mounted 6" from the rear face of a column.
Push to Open: Yes - setback above does not apply to push to open.
Solar Compatible: Yes (purchased separately).
Power Battery (Not Included) and Low Voltage Trickle Charge (Included)
Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
Operating Temperature: -20F to +150F
Warranty: 2 year manufacturer control board, 2 year component manufacturer warranty.
Control Board: Mercury board or 1050US Smart Board Option (See description for more details on board options)
Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo 1550 816 Linear Actuator Single Swing Gate Opener
The Apollo 1550 Gate Opener is the advanced version of the two Apollo linear actuators and is compatible with either the Mercury 310 Board or the 1050US Board. Below, you'll find a comparison of features for the two boards.
Nice Apollo is known as the premier solar gate opener because of its low power consumption and large battery. Designed for ranchers and built in Texas, this opener allows you to set your operating arm on the inside, outside, left side, or right side of the gate, operating in either pull or push mode. This flexibility ensures that you can customize the gate opener to suit the contours of your property.
The Apollo 1550 Single Gate Opener is a low-voltage system, eliminating the need to run 110 AC power to your gate. Simply run 14-gauge low voltage wire to a household outlet within 1,000 feet of the operator (provided) or use a Gate Crafters solar panel (sold separately). With Apollo's generously sized NEMA 3R control box, you can house a larger battery than most gate operating systems. A larger battery means more cycles during power outages or low sunlight (if using solar). A fully charged deep cycle battery can provide up to 300 cycles or an average of 30 days of usage on a basic system before requiring a recharge (battery not included). Each cycle consists of a full open and close, taking approximately 15 seconds in each direction.
Mercury 310 Control Board - (Standardized Option - More user-friendly and easier to program for DIY projects)
The Mercury 310 Control Board simplifies UL 325 compliance with redundant internal safety functions and automated setup for accurate configurations. Its user-friendly interface allows easy controller parameter adjustments without programming, while UL 325 Type C force limiting reduces the need for external safety devices. Designed for solar use, it features an integrated battery charge controller with MPP for optimal charging, a low standby power consumption that enhances battery life, and a prominent Battery Health LED to alert users of potential issues. Additionally, it offers a straightforward one-step firmware update process and built-in entrapment protection.
Solar Capable: Yes
Slide Compatible: No
Swing Compatible: Yes (Linear Actuators)
Operator Option: Single or Dual
BlueBUS: Yes
Communication: BlueBUS, USB port, Fire input, 433 MHz remote
External Entrapment Sensor Options: BlueBUS and 10K monitored sensors
User Controls: Function selection dial, open, close, stop/ clear buttons, value adjustment increase and decease buttons
**You will receive a Mercury 310 Control Board when you select a solar panel option.
1050US Board - (Alternative Option - more contractor-friendly, but can also be done by DIY)
The 1050US series control board, released by Apollo in 2013, is the next generation of smart boards for gate openers. It includes a built-in solar regulator, an LCD display for programming and diagnostics, digital controls for force, speed, and delay, surge suppression, a clock and timer, and a multimeter for battery voltage. Customizable and UL 325-16 compliant, the 1050US Board also supports monitored photo eyes to prevent failures if the photo eye malfunctions.
Solar: Yes
Slide Compatible: Yes (7251/7351)
Swing Compatible: Yes (Apollo Linear Actuator, TITAN Linear Actuator, Vanguard 3501 Swing)
Operator Option: Single or dual
Gate Sync: Synchronization
BlueBUS: Yes
Communication: BlueBUS, BUST4, USB port, OXI receiver
**For this board to function, a UL 325 photo eye safety device must also be attached to the board and used in the operator system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
At Gate Crafters, we cater to our DIY customers. With every Apollo Gate Opener kit, you receive a Gate Crafters DIY install kit. This kit includes user-friendly installation brackets that easily bolt to your posts or columns and to the pivot arm. Also included are two 433 MHz transmitters and one 433 MHz receiver. Our experienced technical staff has been assisting DIY customers for over a decade and has built extensive knowledge about installation and technical support for Apollo gate openers. Gate Crafters’ technical staff is available seven days a week to help you with installation and technical questions.
Today’s gate opener systems can be installed using simple household tools. These systems are designed to operate on low-voltage wiring, which you can handle yourself without the need to hire an electrician. By installing your Apollo gate opener yourself, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your installation and how the gate opener works, making it easier for you to troubleshoot your system and perform routine maintenance if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
“The Apollo NICE 1550, 1650, 1500, and 1600 are the Rancher’s choice when it comes to agricultural gate openers. Apollo is the industry leader in solar powered gate opener and build their gate openers to last.
The Apollo 1550 is suited unto 16 foot gates that weigh 600 pounds.
The motor on the Apollo 1550 is approximately 4 and half inches long and approximately 2 and half inches in diameter. The motor spins a heavy duty all steel gear that turns the large drive gear. The main drive gear, approximately 5 inches around and made of 1/4 inch steel, turns the piston in and out and also drives the limit switches. The limit switches on the Apollo 1550 are magnetic and are very reliable. These switches are completely sealed which will extend the life of your gate opener.
The Apollo 1550 gate opener features stainless steel and aluminum construction. The outside of the gate opener is power coated black to help extend the life of your gate opener. This gate opener has a 2 year warranty.
The difference between the Apollo 1550 and Apollo 1500, is that the 1550 is rated for human/vehicular use, whereas the 1500 is for agricultural use only. The Apollo 1550 features an operational current sensor, which detects the movement of the gate opener arm. If the movement does not match up with the rotation of the motor, the switch stops the gate opener and places it into reverse. This is an additional safety feature that is in place to protect your gate, gate opener, and car in the event of contact with your vehicle.
The Apollo 1550 can utilize two different control boards, either the Apollo 1050US control board or Apollo Mercury 310 control board. The Apollo 1050US smart control board has multiple built in features such as timers, diagnostic, volt meter, and many more built in features. This control board is one of the more sophisticated control boards on the market today. The Apollo Mercury 310 control board has plug-in locations for the necessary accessories such as exit devices, inputs, outputs, safeties, and powering.
When you buy an Apollo 1550 gate opener from Gate Crafters we include a complete DIY kit for you. This kit include the bolt on brackets that attach your gate opener to your post, a receiver and 2 transmitters, a power transformer and charging board if you need it for your gate opener. Gate Crafters also sells key pads that works wirelessly with the included receiver.
I started Gate Crafters back in 2002 with the goal of providing high quality gate openers to homeowners who wanted to do it themselves. Please give us a call, use the live chat on our website, or send us an email to speak with one of our experts who will help you find the right gate and gate opener for your home or business.”
Disclaimer: Some gates shown above may not be manufactured by Gate Crafters. Please contact us to confirm product availability or for more information. Thank you.
The Apollo 1650 is a Gate Crafters specialty. With Gate Crafters' additions, this installer’s choice gate opener can be easily installed as a bolt-on application on any size post by the end user. It serves as the vehicular opener in the Apollo linear operator pair.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
Weight and length: Up to 16' in length and 600 lbs. (per leaf)
Max degree of opening: 105 degrees
Gate Post or Column size (pull to open): Max 8" x 8" post or gate mounted 6" from the rear face of a column.
Push to Open: Yes - setback above does not apply to push to open.
Solar Compatible: Yes (purchased separately).
Power: Battery (Not Included) and Low Voltage Trickle Charge (Included)
Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
Operating Temperature: -20F to +150F
Warranty: 2 year manufacturer control board, 2 year component manufacturer warranty.
Control Board: Mercury 310 board or 1050 Smart Board Option (See description for more details on board options)
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo 1650 816 Linear Actuator Dual Swing Gate Opener
The Apollo 1650 Gate Opener is the advanced version of the two Apollo linear actuators and is compatible with either the Mercury 310 Board or the 1050US Board. Below, you'll find a comparison of features for the two boards.
Nice Apollo is known as the premier solar gate opener because of its low power consumption and large battery. Designed for ranchers and built in Texas, this opener allows you to set your operating arm on the inside, outside, left side, or right side of the gate, operating in either pull or push mode. This flexibility ensures that you can customize the gate opener to suit the contours of your property.
The Apollo 1650 Dual Gate Opener is a low-voltage system, eliminating the need to run 110 AC power to your gate. Simply run 14-gauge low voltage wire to a household outlet within 1,000 feet of the operator (provided) or use a Gate Crafters solar panel (sold separately). With Apollo's generously sized NEMA 3R control box, you can house a larger battery than most gate operating systems. A larger battery means more cycles during power outages or low sunlight (if using solar). A fully charged deep cycle battery can provide up to 300 cycles or an average of 30 days of usage on a basic system before requiring a recharge (battery not included). Each cycle consists of a full open and close, taking approximately 15 seconds in each direction.
Mercury 310 Control Board - (Standardized Option - More user-friendly and easier to program for DIY projects)
The Mercury 310 Control Board simplifies UL 325 compliance with redundant internal safety functions and automated setup for accurate configurations. Its user-friendly interface allows easy controller parameter adjustments without programming, while UL 325 Type C force limiting reduces the need for external safety devices. Designed for solar use, it features an integrated battery charge controller with MPP for optimal charging, a low standby power consumption that enhances battery life, and a prominent Battery Health LED to alert users of potential issues. Additionally, it offers a straightforward one-step firmware update process and built-in entrapment protection.
Solar Capable: Yes
Slide Compatible: No
Swing Compatible: Yes (Linear Actuators)
Operator Option: Single or Dual
BlueBUS: Yes
Communication: BlueBUS, USB port, Fire input, 433 MHz remote
External Entrapment Sensor Options: BlueBUS and 10K monitored sensors
User Controls: Function selection dial, open, close, stop/ clear buttons, value adjustment increase and decease buttons
**You will receive a Mercury 310 Control Board when you select a solar panel option.
1050US Board - (Alternative Option - more contractor-friendly, but can also be done by DIY)
The 1050 series control board, released by Apollo in 2013, is the next generation of smart boards for gate openers. It includes a built-in solar regulator, an LCD display for programming and diagnostics, digital controls for force, speed, and delay, surge suppression, a clock and timer, and a multimeter for battery voltage. Customizable and UL 325-16 compliant, the 1050US Board also supports monitored photo eyes to prevent failures if the photo eye malfunctions.
Solar: Yes
Slide Compatible: Yes (7251/7351)
Swing Compatible: Yes (Apollo Linear Actuator, TITAN Linear Actuator, Vanguard 3501 Swing)
Operator Option: Single or dual
Gate Sync: Synchronization
BlueBUS: Yes
Communication: BlueBUS, BUST4, USB port, OXI receiver
**For this board to function a UL 325 photo eye safety device must also be attached to the board and used in the operator system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
At Gate Crafters, we cater to our DIY customers. With every Apollo Gate Opener kit, you receive a Gate Crafters DIY install kit. This kit includes user-friendly installation brackets that easily bolt to your posts or columns and to the pivot arm. Also included are two 433 MHz transmitters and one 433 MHz receiver. Our experienced technical staff has been assisting DIY customers for over a decade and has built extensive knowledge about installation and technical support for Apollo gate openers. Gate Crafters’ technical staff is available seven days a week to help you with installation and technical questions.
Today’s gate opener systems can be installed using simple household tools. These systems are designed to operate on low-voltage wiring, which you can handle yourself without the need to hire an electrician. By installing your Apollo gate opener yourself, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your installation and how the gate opener works, making it easier for you to troubleshoot your system and perform routine maintenance if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
“The Apollo NICE 1550, 1650, 1500, and 1600 are the Rancher’s choice when it comes to agricultural gate openers. Apollo is the industry leader in solar powered gate opener and build their gate openers to last.
The Apollo 1650 is suited unto 16 foot gates that weigh 600 pounds.
The motor on the Apollo 1650 is approximately 4 and half inches long and approximately 2 and half inches in diameter. The motor spins a heavy duty all steel gear that turns the large drive gear. The main drive gear, approximately 5 inches around and made of 1/4 inch steel, turns the piston in and out and also drives the limit switches. The limit switches on the Apollo 1650 are magnetic and are very reliable. These switches are completely sealed which will extend the life of your gate opener.
The Apollo 1650 gate opener features stainless steel and aluminum construction. The outside of the gate opener is power coated black to help extend the life of your gate opener. This gate opener has a 2 year warranty.
The difference between the Apollo 1650 and Apollo 1500, is that the 1650 is rated for human/vehicular use, whereas the 1500 is for agricultural use only. The Apollo 1650 features an operational current sensor, which detects the movement of the gate opener arm. If the movement does not match up with the rotation of the motor, the switch stops the gate opener and places it into reverse. This is an additional safety feature that is in place to protect your gate, gate opener, and car in the event of contact with your vehicle.
The Apollo 1650 can utilize two different control boards, either the Apollo 1050 control board or Apollo Mercury 310 control board. The Apollo 1050 smart control board has multiple built in features such as timers, diagnostic, volt meter, and many more built in features. This control board is one of the more sophisticated control boards on the market today. The Apollo Mercury 310 control board has plug-in locations for the necessary accessories such as exit devices, inputs, outputs, safeties, and powering.
When you buy an Apollo 1650 gate opener from Gate Crafters we include a complete DIY kit for you. This kit include the bolt on brackets that attach your gate opener to your post, a receiver and 2 transmitters, a power transformer and charging board if you need it for your gate opener. Gate Crafters also sells key pads that works wirelessly with the included receiver.
I started Gate Crafters back in 2002 with the goal of providing high quality gate openers to homeowners who wanted to do it themselves. Please give us a call, use the live chat on our website, or send us an email to speak with one of our experts who will help you find the right gate and gate opener for your home or business.”
Disclaimer: Some gates shown above may not be manufactured by Gate Crafters. Please contact us to confirm product availability or for more information. Thank you.
The Nice Apollo 7251 slide gate opener combines durability, reliability and convenience to move gates up to 800lbs. The powerful 1050 Controller works perfect in either solar or AC installations. Recommended for Residential, Farm, Ranch, and Light Commercial applications.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
Weight and length: Up to 25' in length and 800 lbs.
Mounting Options: Post mount
Solar Compatible: Yes (purchased separately).
Power: 12 volt deep cycle marine battery - 105amp./hour (Not supplied) In the event of electrical power outage or significantly overcast days, a fully charged deep cycle marine battery will provide up to 300 cycles or 30 days usage on a basic system before requiring a recharge.
Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
Operating Temperature: -4º to 122º F (-20º to 50º C)
Warranty: 3 year manufacturer control board, 3 year component manufacturer warranty.
Control Board: 1050US Smart Board Option (See description for more details)
Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo 7251 Commercial Post Mount Single Slide Gate Opener
The Nice Apollo 7251 slide gate opener expertly combines durability and reliability, making it a perfect choice for residential and light commercial applications. Designed to move gates weighing up to 800 lbs. and extending 25 feet, it ensures smooth and efficient operation. The powerful 1050 Controller enhances functionality, supporting both solar and AC power options for versatile energy solutions.
Installation is straightforward with its user-friendly chain drive and flexible mounting options, allowing you to customize your setup to fit your property. The spacious cabinet accommodates larger backup batteries for solar installations, ensuring uninterrupted operation even during power outages.
Ideal for homes, farms, ranches, and light commercial use, the 7251 delivers high-end performance with a duty cycle that varies based on charging capacity. With a travel rate of 1 ft./sec (30 cm/s), this opener enhances security and convenience while offering advanced configuration options through the 1050 Controller. Experience the ease and confidence of automated gate operation with the 7251.
1050US Board - (Standardized Option)
The 1050 series control board, released by Apollo in 2013, is the next generation of smart boards for gate openers. It includes a built-in solar regulator, an LCD display for programming and diagnostics, digital controls for force, speed, and delay, surge suppression, a clock and timer, and a multimeter for battery voltage. Customizable and UL 325-16 compliant, the 1050US Board also supports monitored photo eyes to prevent failures if the photo eye malfunctions.
Solar: Yes
Slide Compatible: Yes (7251/7351)
Swing Compatible: Yes (Apollo Linear Actuator, TITAN Linear Actuator, Vanguard 3501 Swing)
Operator Option: Single or dual
Gate Sync: Synchronization
BlueBUS: Yes
Communication: BlueBUS, BUST4, USB port, OXI receiver
**For this board to function a UL 325 photo eye safety device must also be attached to the board and used in the operator system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
At Gate Crafters, we cater to our DIY customers. With every Apollo Gate Opener kit, you receive a Gate Crafters DIY install kit. This kit includes two 433 MHz transmitters, one 433 MHz receiver, one low voltage transformer and two mounting posts. Our experienced technical staff has been assisting DIY customers for over a decade and has built extensive knowledge about installation and technical support for Apollo gate openers. Gate Crafters’ technical staff is available seven days a week to help you with installation and technical questions.
Today’s gate opener systems can be installed using simple household tools. These systems are designed to operate on low-voltage wiring, which you can handle yourself without the need to hire an electrician. By installing your Apollo gate opener yourself, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your installation and how the gate opener works, making it easier for you to troubleshoot your system and perform routine maintenance if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, pliers, etc..)
5/16” and 3/8” wrenches
Bubble Level
Drill and assorted size bits
Electrical conduits, grommets, asphalt patch, etc. as needed
Excavation tools for installing posts and mounting pad
Concrete (for pad)
Two 3” width posts long enough to provide a stable 24” height above ground
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
"Texas is known to have some of the toughest conditions for a slide operator. Some areas have high wind and sand storms, while others get hit with heavy rain. The people at Apollo know this because they live there and they have designed this operator to be effective in their own backyard. And you know if it can stand up there, it can stand up just about anywhere.
The real highlight of this opener is in its control board. It features Apollo's new 1050US control board. The 1050US is intelligent, easy to use and a leap above many other comparable control boards. Among the many advantages of the 1050US board is the self-adjustment to natural factors. All UL 325 approved boards have an adjustable inherent obstruction sensor. The 1050US board takes it further by self-learning what natural obstructions already exist. For example, if your gate is heavy but you want the obstruction sensor to be very sensitive to avoid damage or injury the 1050US series board will automatically learn changes in the momentum caused by the weight of the gate and differentiate them from an actual obstacle.
Gate Crafters is dedicated to getting the right gate opener for your gate. As more gate openers are being made economically feasible and easy to maintain, the selection is going to grow ever wider. That's where Gate Crafters comes in. We have extensive amounts of educational material on our website to help you become an informed consumer. We also have our factory-trained representatives standing by to answer all your gate and gate opener questions. The combination of our customers passion for home improvement and Gate Crafters' wealth of knowledge is a perfect match and cannot be duplicated."
The Nice Apollo 7351 slide gate opener combines durability, reliability and convenience to move gates up to 800lbs. The powerful 1050 Controller works perfect in either solar or AC installations. Recommended for Residential, Farm, Ranch, and Light Commercial applications.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
Weight and length: Up to 25' in length and 800 lbs.
Mounting Options: Pad Mount
Solar Compatible: Yes (purchased separately).
Power: 12 volt deep cycle marine battery - 105amp./hour (Not supplied) In the event of electrical power outage or significantly overcast days, a fully charged deep cycle marine battery will provide up to 300 cycles or 30 days usage on a basic system before requiring a recharge.
Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
Operating Temperature: -4º to 122º F (-20º to 50º C)
Warranty: 3 year manufacturer control board, 3 year component manufacturer warranty.
Control Board: 1050US Smart Board Option (See description for more details)
Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo 7351 Commercial Pad Mount Single Slide Gate Opener
The Nice Apollo 7351 slide gate opener expertly combines durability and reliability, making it a perfect choice for residential and light commercial applications. Designed to move gates weighing up to 800 lbs. and extending 25 feet, it ensures smooth and efficient operation. The powerful 1050 Controller enhances functionality, supporting both solar and AC power options for versatile energy solutions.
Installation is straightforward with its user-friendly chain drive and flexible mounting options, allowing you to customize your setup to fit your property. The spacious cabinet accommodates larger backup batteries for solar installations, ensuring uninterrupted operation even during power outages.
Ideal for homes, farms, ranches, and light commercial use, the 7351 delivers high-end performance with a duty cycle that varies based on charging capacity. With a travel rate of 1 ft./sec (30 cm/s), this opener enhances security and convenience while offering advanced configuration options through the 1050 Controller. Experience the ease and confidence of automated gate operation with the 7351.
1050US Board - (Standardized Option)
The 1050 series control board, released by Apollo in 2013, is the next generation of smart boards for gate openers. It includes a built-in solar regulator, an LCD display for programming and diagnostics, digital controls for force, speed, and delay, surge suppression, a clock and timer, and a multimeter for battery voltage. Customizable and UL 325-16 compliant, the 1050US Board also supports monitored photo eyes to prevent failures if the photo eye malfunctions.
Solar: Yes
Slide Compatible: Yes (7251/7351)
Swing Compatible: Yes (Apollo Linear Actuator, TITAN Linear Actuator, Vanguard 3501 Swing)
Operator Option: Single or dual
Gate Sync: Synchronization
BlueBUS: Yes
Communication: BlueBUS, BUST4, USB port, OXI receiver
**For this board to function a UL 325 photo eye safety device must also be attached to the board and used in the operator system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
At Gate Crafters, we cater to our DIY customers. With every Apollo Gate Opener kit, you receive a Gate Crafters DIY install kit. This kit includes two 433 MHz transmitters, one 433 MHz receiver, one low voltage transformer and two mounting posts. Our experienced technical staff has been assisting DIY customers for over a decade and has built extensive knowledge about installation and technical support for Apollo gate openers. Gate Crafters’ technical staff is available seven days a week to help you with installation and technical questions.
Today’s gate opener systems can be installed using simple household tools. These systems are designed to operate on low-voltage wiring, which you can handle yourself without the need to hire an electrician. By installing your Apollo gate opener yourself, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your installation and how the gate opener works, making it easier for you to troubleshoot your system and perform routine maintenance if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, pliers, etc..)
5/16” and 3/8” wrenches
Bubble Level
Drill and assorted size bits
Electrical conduits, grommets, asphalt patch, etc. as needed
Excavation tools for installing posts and mounting pad
Concrete (for pad)
Two 3” width posts long enough to provide a stable 24” height above ground
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
"Texas is known to have some of the toughest conditions for a slide operator. Some areas have high wind and sand storms, while others get hit with heavy rain. The people at Apollo know this because they live there and they have designed this operator to be effective in their own backyard. And you know if it can stand up there, it can stand up just about anywhere.
The real highlight of this opener is in its control board. It features Apollo's new 1050US control board. The 1050US is intelligent, easy to use and a leap above many other comparable control boards. Among the many advantages of the 1050US board is the self-adjustment to natural factors. All UL 325 approved boards have an adjustable inherent obstruction sensor. The 1050US board takes it further by self-learning what natural obstructions already exist. For example, if your gate is heavy but you want the obstruction sensor to be very sensitive to avoid damage or injury the 1050US series board will automatically learn changes in the momentum caused by the weight of the gate and differentiate them from an actual obstacle.
Gate Crafters is dedicated to getting the right gate opener for your gate. As more gate openers are being made economically feasible and easy to maintain, the selection is going to grow ever wider. That's where Gate Crafters comes in. We have extensive amounts of educational material on our website to help you become an informed consumer. We also have our factory-trained representatives standing by to answer all your gate and gate opener questions. The combination of our customers passion for home improvement and Gate Crafters' wealth of knowledge is a perfect match and cannot be duplicated."
Please note: Like most suppliers, we do NOT allow returns for electronic parts. Please make sure your item is compatible, or give us a call to make sure you get the correct product for your project. Thank you.
The Apollo 1050 Retrofit Kit is a kit used to replace the 850 board on your operator and upgrade it to a new system. Packed with innovative functions, including a day programmable timer and programmable inputs and outputs, it ensures maximum ease and efficiency in your operations. With primary/secondary management capabilities, it seamlessly coordinates the movement of two motors for dual applications, offering enhanced control and synchronization.
1050US (US Board): Needs Photoeyes
1050i (International Board): Does not need Photoeyes
Nice Apollo 1050US (US Version)
The Nice Apollo 1050US Control Board is a full-featured residential gate controller engineered to meet UL 325 (2018 and later) safety requirements for U.S. installations. Designed for applications where strict safety compliance is required, the 1050US mandates the use of monitored external entrapment protection devices, such as photo eyes or edge sensors, to operate.
Built for advanced customization, the 1050US offers over 100 programmable options, smooth soft open/close control, dual-gate synchronization, and integrated solar charging. This controller is ideal for residential slide and swing gate systems installed in the United States where compliance with UL 325 and ASTM F2200 safety standards is required.
Safety Notice (1050US Only)
The Nice Apollo 1050US can not operate without the required number of monitored entrapment protection devices, per UL 325 (2018) standards:
Slide Gates: Two external entrapment sensors (one per direction)
Swing Gates: Two external entrapment sensors unless no risk exists in one direction
Nice Apollo 1050i (International Version)
The Nice Apollo 1050i Control Board is an internationally focused version of the 1050 controller, designed for regions outside the United States or installations where monitored safety devices are not required. Unlike the 1050US, the 1050i does not mandate monitored photo eyes, offering greater flexibility for non-UL325 environments.
The 1050i includes a built-in LCD display, making setup, diagnostics, and troubleshooting easier across diverse international applications. With full support for dual gates, solar power, advanced programming options, and smooth gate operation, the 1050i is ideal for installers who need powerful functionality without U.S.-specific safety constraints.
Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Great Innovative functions for Maximum Convenience and Safety: the integrated control unit offers several features such as day programmable timer, Programmable Inputs and Outputs.
Primary/Secondary Management: it controls and synchronizes the movement of two motors for dual applications.
Safe: speed, force, sensitivity to obstacles which distinguishes impact vs dragging force, position of the gate and other parameters can be adjusted according to specific installation conditions.
Reliable: a battery back-up system guarantees continued operation during power outages. Solar power compatible: built-in regulated charging for up to a 30 W panel.
Simple: the large LCD display with menus makes programming and controlling the system easy and trouble-free.
Brackets allow you to mount your board soundly in a control box.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, wrenches, pliers, etc..)
Drill and assorted size bits
Hardware for mounting control box
Electrical conduits, grommets, asphalt patch, etc. as needed
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
%20Banner.jpg)
%20Banner.jpg)
.jpg)
