Related Product List:
|
|
|
|
Viking K2 Single Slide Gate Operator VA-K2SPS
33013,35023,36067
Related Product Detail:
 |
|
The Estate Swing Low Impact Sliding Gate Opener Automatic Gate Lock is compatible with all sliding gate openers on GateCrafters.com
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Sliding driveway gate openers have until now had an issue in which an automatic lock was not able to be used with the gate. All the automatic locks were designed for swinging gates because of the mounting plates and also required a wire across the gate which poses issues with a gate that slides and moves locations.
The Estate Swing Low Impact Sliding gate lock kit solves these issues with its unique opener side mounting and gate mounted receiving bracket. Also the low impact aspect solves the now common issue of a gentle ending to gate opener movements. A common feature you’ll see is as a gate closes it slows down for the last few feet instead of banging shut. This reduces the banging noise as well as takes stress off the physical components of the gate and gate opener.
One problem with this feature is the lack of momentum as the gate closes reduces the amount of weight hitting the lock to below the weight needed for the gate to fully close and lock. Instead, the gate latches rest on top of each other without fully locking, leaving your gate unprotected against forced entry and wind.
What separates the Estate Swing lock from the rest of the competition is that it requires less than 1 pound of weight for the gate to lock. Other locks require approximately 10 pounds of weight, which is no longer generated from the momentum of the gate because of the slow down feature.
The Estate Swing lock is the unique pivot design reduces power consumption. The older model locks require 3 amps to pull the latch open because they pull back on a direct linear path. The Estate Swing lock requires less than 1 amp because it works on a swivel, making the pulling action much easier.
The reduction in power required for the lock means less strain is put on the system as a whole as power is distributed through the motor and control board. Since less power is then required from the system, you can reliably active and run the motor, power accessories, get a longer life span from battery systems, and will not stress the circuitry of the control board of the gate opener.
The best features of the new Estate Swing Lock, however, are that it is compatible with all of our gate opener models here at GateCrafters.com and it comes with a 2yr warranty!
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
Words from Senior Application Engineer, Anthony Gaeto
|
Top of Page
|
Go back to related product list |
 |
|
|
The FAAC Photobeam Photoelectric Safety Sensor 785163 is a recommended accessory to your FAAC gate opener and is required for FAAC DSW950 swing gate operators. It is a directional photocell with diagonal alignment and can be mounted to a wall or post. While safety sensors should always be a welcome addition to any gate installation, they are required for UL - 325 compliance.
- Angle of detection: +/- 4 degrees
- Range: 100 ft.
- Response Time: 10ms
- Power Supply: 24VDC
Go back to related product list |
 |
|
Viking Monitor for Wireless Gate Entry - VA-18Monitor Controlling your gate operator has never been easier! The Viking Monitor App will wirelessly open/close your gate from anywhere in the world. Security is not a concern since the Viking Monitor Application will give you instant notifications on all gate operations and actions. With one touch you are able to view all history, diagnostics, real time data and more! Save all of your operators data with the Cloud and/or a USB. The Viking Monitor App will easily interface to your Android/Apple mobile devices with a simple download of the application from your App Store. GateCrafters.com offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
|
Viking R6 Swing Gate Operator
Viking F1 Swing Gate Operator
Viking E4 Swing Gate Operator
Viking G5 Swing Gate Operator
|
Viking X390 Swing Gate Operator
Viking K2 Slide Gate Operator
Viking L3 Slide Gate Operator
Viking H10 Slide Gate Operator
|
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
Technical
- Cloud Based: Direct Access from anywhere in the World
- Plug & Play: E-4 & VFLEX Control Board
- WIFI Connectivity: Up to 100' / 2.4 GHz Required
- Real Time Data: Instant Notifications on all Actions
- Compatibility: Android & Apple iOS
- USB Port: Easily Store any Information
Network
- Not compatible with 5.0 GHz networks
- No static IP Address configuration
- DHCP server must be enabled and active on network
- 3 Mb/s download , 1Mb/s upload (This is recommended, but the Monitor can function on less.)
- Under 60ms of latency to the ISP (It will still function at higher latency, but will likely cause problems and there will be a delay when issuing commands.)
- Supports WEP, WPA, and WPA2 (including WPA2-PSK-AES). It does not support WPA2-Enterprise.
Electrical
- (1) Monitor Device
- (1) 2.2dbi Antenna
- (1) Connection Cable
- (1) Viking USB

For over a decade GateCrafters.com has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future. |
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US. |
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
|
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details. |
Go back to related product list |
|