Instant Price Match: Purchase from an authorized dealer of LiftMaster to ensure your warranty is valid! Every Authorized LiftMaster dealer must advertise at their minimum advertised price (MAP). You will always see the minimum advertised price on our site, however we shop our competitors daily. When you click the “instant price match” button above or call (813) 792-9726 we will give you today’s price, with shipping included.
The LiftMaster/Chamberlain LA500UL gate opener is a 24VDC residential and light commercial linear actuator. Our most powerful swing gate operator delivers unsurpassed performance and secure access to your property. This kind of reliability is now delivered in their LA500 gate opener.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Weight and length: Up to 18' in length or 1600 lbs.
Operating Temperature: -4°F (-20°C) to 140°F (60°C)
Max degree of opening: 90° opening in 15-17 seconds
Solar Compatible: Yes (purchased separately)
Power: Full-time AC-run operation, 120V Single Phase with battery backup
Power Wire Specification:10, 12, or 14 Gauge Wire (sold separately). Wire depends on distance between transformer and control board.
Warranty: Two year manufacturer warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
LiftMaster LA500UL Single Swing Gate Opener Kit with MyQ Technology
The LiftMaster LA500UL gate opener is a 24VDC residential and light commercial linear actuator. Our most powerful swing gate operator delivers unsurpassed performance and secure access to your property. This kind of reliability is now delivered in their LA500 gate opener.
Our most powerful swing gate operator offers unsurpassed performance and secure access to your property. You can enter and exit your property even when the power is out, thanks to our Battery Backup feature and ultra-efficient Power Management System, which provides up to 500 cycles or 24 days of operation. It delivers the performance you need when you need it, supported by an ultra-reliable Solar Power System. The heavy-duty cast aluminum housing DC motor is powerful enough to handle the most demanding applications. The soft start/stop operation extends the life of the operator and hardware, making it ideal for heavy-duty gate use. It is rated for gates up to 18 feet in length or 1,600 pounds.
LiftMaster has added an extra level of convenience with the integration of MyQ technology. By simply downloading the MyQ application to your smartphone and connecting the LiftMaster 828LM Internet Gateway (not included), you will be able to control your driveway gate openers and other LiftMaster automated doors and gates. The MyQ smartphone application is compatible with all of LiftMaster’s MyQ-enabled devices.
Ordering Options
The ordering options for the LiftMaster residential gate opener series involve selecting your desired frequency and the size of the control box. The standard box measures 14" x 10" x 6," whereas the larger upgraded box measures 20" x 17" x 6."
There are two options:
Standard Box:Comes with the standard control box.
Large Control Box:Comes with the larger, upgraded control box. (Please note that the larger box is designed to store a larger battery—batteries are not included with the larger box.)
If you need a dual gate opener system but are unable to run low-voltage wire underneath your driveway, LiftMaster has a solution for you. You can simply purchase two single gate opener systems, and with the built-in network communication, these two systems will work together as a dual opener system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
LED DIAGNOSTIC DISPLAY - Simplifies installation
and troubleshooting
SOLAR READY ULTRA RELIABLE SYSTEM - Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
WIRELESS DUAL- GATE COMMUNICATION Eliminates expensive conduit costs and unsightly
driveway scars
PROGRAMMABLE AUXILIARY RELAYS - Easily add additional features, such as warning
lights/alarms
BI-PART DELAY Monitors and adjusts speed and
position of each wing to ensure primary gate
closes last
SYNCHRONIZED CLOSE - Simultaneously closes gates
PRE-MOTION WARNING ALARM - Activates onboard
alarm three seconds prior to gate motion
ANTI-TAILGATE - Prevents unauthorized access.
Gate will pause when closing as vehicle pulls onto
interrupt loop or breaks photo beam. Once vehicle
backs up, gate will continue to close.
HOMELINK® COMPATIBLE - Version 4 and higher
SECURITY+ 2.0® ON-BOARD RADIO RECEIVER - Up to 50 remote controls (unlimited with
811LM/813LM).
COMMERCIAL-DUTY CAST ALUMINUM HOUSING WITH HEAVY-DUTY DC MOTOR - Powerful enough to perform in the most demanding applications
SOFT START/STOP AND MID-TRAVEL REVERSAL - extends operator and hardware life in high-cycle and heavy-gate applications.
KEYED MANUAL DISCONNECT - when unlocked, allows gate to be operated manually.
INHERENT REVERSING SENSOR - detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
FIRE DEPARTMENT COMPLIANCE - allows gate to auto open upon loss of AC power or battery depletion.
MOLECULARLY BONDED COATING - on drive system never needs lubrication.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and gate opener accessories. Thanks to our extensive technical and installation knowledge, we are authorized to sell to the DIY market. If you purchase an LA500 gate opener system from Gate Crafters and install it yourself, your warranty eligibility will be recognized by LiftMaster and supported by Gate Crafters. You can access our trained technical staff seven days a week from 9 AM to 9 PM EST. The LA500 can be installed with simple household tools and does not require any specialized equipment. The wiring required for the installation is straightforward, as it consists entirely of low-voltage wiring.
By DIY installing your gate opener system, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your gate opener installation and how the system works, making it easier for you to troubleshoot and perform routine maintenance if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
"I bought the opener to install on my one of my costumer's gates that we built for their home. I was a little paranoid when she and her 2 year old son came out and watched the whole setup process. But, to my surprise, this was the first opener I have installed and it took no time at all to get it fully operational. The manual was very easy and it just took a few steps to set it up. It is working great now. Thanks, LiftMaster and the people at Gate Crafters. You made my life easy with the ease of ordering and install."
Eric S.
The LiftMaster INSL24UL 24VDC Heavy-Duty Industrial Dual Slide Gate Operator features a brushless DC motor capable of continuous-duty. Operator speed is variable from 0.5 ft./sec. to 1 ft. sec with soft start/stop. The INSL24UL's recommended capacity is rated for gates up to 70 ft. in length and weighing up to 2,200 lbs.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Max Gate Weight: 2,200 lbs. per leaf (998 kg)
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Mounting Options: Can be post mounted, or mounted on a MRIN Riser Mount (not included)
Solar Compatible: Yes
Power: 24 VDC Transformer Run/Battery Backup
Power Wire Specification:10, 12, 14 Gauge Wire (sold separately).
Strong metal housing for protection against vandalism
Warranty: LiftMaster 5 Year Commercial Limited Warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
*Disclaimer: The LiftMaster INSL24UL Gate Opener is designed to be post-mounted. If you would like it to be pad-mounted, you will need to purchase and install the LiftMaster MRIN. (Posts and MRIN not included)
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
The INSL24UL control board has onboard status LED’s that indicate the status of the operator. The quick close feature prevents unauthorized access which stops vehicles from tailgating. Operator is protected by an outdoor rated (NEMA 3R), 12 ga. steel, weatherproof cabinet. The security+ 2.0 receiver can handle up to 50 remote controls to be programmed to the operator.
Powerful
This operator is powered by AC by default and the operator kit includes (2) 12 Vdc, 7AH batteries. The built-in battery backup feature provides standby power during an outage. In AC power mode, batteries are charged in the circuit by the integrated transformer and only require the included (2) 12 Vdc batteries to be installed.
Solar
Solar panels (not included) can also be used to deliver power to the operator and panels can be wired for either 120 Vac or 240 Vac. The included 7AH batteries are only suitable for AC and power standby modes. For solar panel installations (2) 33AH batteries (not included) are strongly recommended for optimal solar performance and must be facing north. Solar application requirements accommodate a minimum of (2) 10 Watt solar panels up to a maximum of (6) 10 Watt solar panels.
*The 33AH application requires battery harness K41-0102-000. The use of photoelectric sensor heaters are not recommended in solar applications.
Safe
The INSL24UL is UL listed with advanced sensors and monitored safety protection devices that are tested together to deliver a secure system. The LiftMaster S505AL monitored small profile resistive edge and LMRRUL monitored retro-reflective photo eye are included with the INSL24UL to provide the entrapment protection which is required for slide gate applications.
*A minimum of two independent monitored entrapment protection devices are required to be installed according to the UL 325 Entrapment Protection Requirements.
Monitored
The myQ Smart Facility Access cloud based solution keeps you up to date and in control of all of the facility’s access points. The ultimate operator for environments such as manufacturing, transportation, municipality, utility, and warehouse locations. Managers with access to the myQ Facility Management Application can monitor entrance and exit access in real-time and track current open/close gate status. This additional feature uses internet connectivity to control the gate from anywhere.
*Requires additional internet gateway unit.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Sync
Synchronizes gate operation and eliminates costly trenching; set speed independently if needed
UL Listed
Tested to the most stringent UL 325 industry guidelines. External entrapment protection devices need to be added to meet UL 325 standards. Your Installer will recommend suitable entrapment protection devices for your installation, such as photoelectric or edge sensors
Gate Safety Sensors
Protect people entering or leaving your gate with safety sensors that stop the gate from closing on obstructions
Safety Reversing
When detecting an obstruction the gate reverses with the inherent reversing sensor and the included monitored safety accessories.
Quick Close Feature Prevent unauthorized access with quick close feature that stops vehicles from tailgating.
Manual Disconnect Allow Unlocked gates to be opened manually with manual disconnect feature.
Gate Battery Backup
Get in and out when the power's out with battery backup.
Usage Classification: Class II, III, and IV Main AC Supply: 120 Vac, 9.3 Amps including accessory outlets -or- 240 Vac, 1.8 Amps System Operating Voltage: 24 Vdc transformer run/ battery backup Accessory Power: 24 Vdc, 1 A max for ON + SW (switched) Solar Power Max: 24 Vdc at 60 Watts max. Maximum Gate Weight: 2,200 lbs. (998 kg) Minimum Gate Travel Distance: 4 feet (1.2 m) Maximum Gate Travel Distance: 70 ft. (21.34 m) Maximum Gate Travel Speed: 1 ft./sec Maximum Daily Cycle Rate: Continuous for line voltage, not for solar Maximum Duty Cycle: Continuous Temperature Specifications (with Optional Heater): -40°C to 60°C (-40°F to 140°F) Temperature Specifications (without Optional Heater): -20°C to 60°C (-4°F to 140°F)
*LiftMaster recommends professional installation and only supports products that are being installed or serviced by a professional installer. For installations that are purchased on Gatecrafters.com we can support installation, general troubleshooting, and warranty assistance directly.
*LiftMaster Gate Openers do not come with any remotes from the factory or most other retailers. We give you (2) FREE LiftMaster remotes to work with the built in receiver
Additional items included with second purchase option:
(2) Free LiftMaster Remotes
(1) CAPXS- Smart Video Intercom-S
*Included items depend on purchase selection at check out.
For over a decade Gate Crafters has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. If you purchase a LiftMaster gate opener system from Gate Crafters and install it yourself, your warranty eligibility will be recognized by LiftMaster and supported by Gate Crafters. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. The LiftMaster gate opener can be installed with simple household tools and do not require any specialized tools. Wiring required for the installation is simple and straightforward as it is all low voltage wiring.
When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
LiftMaster/Chamberlain's domestic operations are located in Elmhurst, IL and maintains a wide reaching branch of international offices. Its manufacturing has been in
Mexico for more than 20 years. In business for over 100 years this company is well known for its garage door, gate operators and other access oriented innovations.
Instant Price Match: Purchase from an authorized dealer of LiftMaster to ensure your warranty is valid! Every Authorized LiftMaster dealer must advertise at their minimum advertised price (MAP). You will always see the minimum advertised price on our site, however we shop our competitors daily. When you click the “instant price match” button above or call (813) 792-9726 we will give you today’s price, with shipping included.
The LiftMaster HDSL24UL Heavy-Duty Slide Gate Operator is designed for high-traffic, commercial, and residential applications. With a 1.5 HP brushless DC motor, it delivers continuous-duty performance with a custom 40:1 gear ratio for high-cycle operation. The variable cycle speed adjusts from 0.5 to 1 ft./sec., ensuring smooth start/stop operations and extending the life of the equipment.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Max Gate Weight: 3,000 lbs. (1,360 kg)
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Mounting Options: Mounted on a concrete pad by itself, or with post mounts.
Solar Compatible: Yes
Power: 24 VDC Transformer Run/Battery Backup
Power Wire Specification:10, 12, 14 Gauge Wire (sold separately).
Warranty: LiftMaster 7 Year Residential, 5 Year Commercial Limited Warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
The HDSL24UL opener is designed for professional installation only. Due to the nature of the 120VAC power, it is essential to have a trained professional, such as a certified electrician, install the gate opener. Gate Crafters does not consider the HDSL24UL to be a DIY product.
The LiftMaster HDSL24UL Heavy-Duty Slide Gate Operator is designed for high-traffic, commercial, and residential applications. With a 1.5 HP brushless DC motor, it delivers continuous-duty performance with a custom 40:1 gear ratio for high-cycle operation. The variable cycle speed adjusts from 0.5 to 1 ft./sec., ensuring smooth start/stop operations and extending the life of the equipment.
Powered by myQ® technology, the HDSL24UL allows facility managers to remotely monitor and control access points, improving security and productivity. The operator features wireless dual-gate communication, eliminating trenching costs and enabling synchronized gate operation. It also includes advanced safety features such as Quick Close, Anti-Tailgate, and Posilock®, ensuring property security and preventing unauthorized access.
Built with commercial-grade durability, the HDSL24UL is equipped with a #40 industrial chain providing twice the pull strength of the gate weight, and it features UL® listed safety entrapment protection devices. With a solar-ready, ultra-reliable power system, this operator offers efficient operation in all conditions. Backed by a 5-year commercial and 7-year residential warranty, the HDSL24UL is a smart, reliable, and secure solution for high-traffic gate systems.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Continuous-duty gate operation built with a custom heavy-duty gear box, size 70, direct drive 40:1 gear ratio.
Custom 1.5 HP peak brushless DC motor delivers up to 6 million cycles.
Variable cycle speed adjusts to meet application needs from .5 ft./sec. to 1 ft./sec.
Smooth start/stop operation and mid-travel reversal extend operator hardware life.
#40 industrial chain provides a pull strength of 2x the gate weight.
Warranty: 5 years commercial, 7 years residential.
Smart
Powered by myQ® for full insight and control over community and facility access points. Monitor and control multiple communities with Smart Community Access. Improve warehouse efficiency and productivity with Smart Facility Access.*
Four programmable auxiliary relays accommodate more accessories.
Wireless dual-gate communication synchronizes gate operation and eliminates costly trenching; set speed independently if needed.
Safe and Secure
Quick close and anti-tailgate quickly secures property, preventing unauthorized access.
Posilock® automatically closes the gate when it is pushed from the closed limit.
UL® listed gate operator with monitored safety entrapment protection devices.
Included Accessories:
LMRRULMonitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Accessory Power: 24VDC 1 A max. output; switched and unswitched power
Solar-Ready, Ultra-Reliable System delivers power when and where you need it (LMRRUL/LMTBUL - heater option not recommended for solar applications).
Commercial-Grade Design
Chassis: Constructed with 1/4 in. Steel, Powder Coated
Cover: High-Density, UV-Resistant Polyethylene Cover for Excellent Heat and Corrosion Resistance
UL® Usage Classification: I, II, III, and IV
Operator Weight: 172 lbs.
Dimensions
Height: 26.51”
Width: 18.14”
Depth: 20.39”
Variable Gate Speed
.5 ft. to 1 ft. per second
Standard Features
Inherent Reversing Sensor detects obstructions and reverses gate.
Posilock® automatically closes the gate when it is pushed from the closed limit.
Manual Disconnect allows gate to be opened manually when released.
Monitored Safety Inputs 3 main board, 3 expansion board.
Security+ 2.0® On-Board Radio Receiver: up to 50 remote controls (unlimited with 811LM/813LM).
LED Diagnostic Display simplifies installation and troubleshooting
Programmable Auxiliary Relays: 4 relays make adding additional features easy.
HomeLink® Compatible version 4.0 or higher (may require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information).
HomeLink® Compatible
Compatibility Bridge™ (not included) necessary for certain vehicles. Visit bridge.liftmaster.com to find out if a Bridge is needed.
HomeLink® is a registered trademark of Gentex Corporation.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
.jpg)
