Instant Price Match: Purchase from an authorized dealer of LiftMaster to ensure your warranty is valid! Every Authorized LiftMaster dealer must advertise at their minimum advertised price (MAP). You will always see the minimum advertised price on our site, however we shop our competitors daily. When you click the “instant price match” button above or call (813) 792-9726 we will give you today’s price, with shipping included.
The LiftMaster/Chamberlain LA412UL Gate Opener is a residential and light commercial linear actuator with solar capabilities.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Weight and length: Up to 16' in length or 850 lbs.
Operating Temperature: -4°F (-20°C) to 140°F (60°C)
Max degree of opening: 115°
Gate Post or Column size (pull to open): Max 7" x 7" post or gate mounted 4" from the rear face of a column.
Push to Open: Yes - setback above does not apply (not included)
Solar Compatible: Yes - 10 watt solar panel included (max 30W solar panel - not included)
Power: Battery (included with standard box)
Power Wire Specification:12 Gauge Wire (sold separately). Length of wire depends on distance between transformer and control board.
Warranty: 2 year manufacturer control board, 2 year component manufacturer warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
LiftMaster LA412UL Single Swing Gate Opener with MyQ Technology
Most people don't even realize the make of their garage door opener because they've never encountered a problem that required contacting the manufacturer. This level of reliability is now offered in the LA412 gate opener.
The LiftMaster/Chamberlain LA412 Single Gate Opener is a low-voltage system, eliminating the need to run expensive 110-volt AC power wiring to your gate. The included 10-watt solar panel charges the battery, so there’s no need to connect to any other power source. Furthermore, the LA412 meets the high safety standards of the UL 325 listing, ensuring it is a reliable and safe gate-opening device.
The LiftMaster line of gate openers now features built-in MyQ technology. This allows you to control your MyQ-enabled LiftMaster devices directly from your smartphone. When connected to the LiftMaster 828LM Internet Gateway (not included), you can take full advantage of the built-in MyQ connectivity. MyQ technology provides the added convenience of managing all your MyQ LiftMaster openers from a single device.
Max 30W Panel
Ordering Options
The ordering options for the LiftMaster residential gate opener series involve selecting your desired frequency and the size of the control box. The standard box measures 14" x 10" x 6," whereas the larger upgraded box measures 20" x 17" x 6."
There are two options:
Standard Box:Comes with the standard control box.
Large Control Box:Comes with the larger, upgraded control box. (Please note that the larger box is designed to store a larger battery—batteries are not included with the larger box.)
If you need a dual gate opener system but are unable to run low-voltage wire underneath your driveway, LiftMaster has a solution for you. You can simply purchase two single gate opener systems, and with the built-in network communication, these two systems will work together as a dual opener system.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
CONTROL BOARD, EASY READ DIAGNOSTICS - The LED light diagnostic on the control board permits easy diagnostics of problems or missing connections. This allows efficient repair and swift continuation of normal electric gate operation.
SOFT START/SOFT STOP Soft start/soft stop is a feature in which the control board, during the set up process, learns where the opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This reduces stress on the gate and operator for extended functionality.
BI-PART LATCH - Designed to allow one gate leaf to begin opening or closing independently for those gates that have overlapping leaves.
ADJUSTABLE CLOSING TIMER Set your gate to close between 0 and 120 seconds after reaching the full open position.
ELECTRONIC LIMIT SWITCHES - Set the limit switches with just the push of a button for accurate, easy setup.
ON BOARD RADIO RECEIVER - It is compatible with a number of wireless remotes and allows operation of a number of devices with one remote - such as the garage door and the gate opener.
INPUT TERMINALS - For convenient addition of accessories requiring like loops, sensing devices and controlling devices.
QUICK, SAFE AND SECURE MANUAL RELEASE - The LA-412 operator comes with a manual release key that can be used should the power fail and the backup battery is not charged. This ensures that the driveway gate can be opened without damaging or disconnecting any components.
HIGHEST LEVEL OF SAFETY - This operator is designed with separate force adjustments for obstructions. If the gate meets an obstruction while it is opening it will reverse to close, and if it is closing it will reverse to open. Additionally, the LA-412 is UL 325 Listed.
HIGH LEVEL OF CONVENIENCE - The LiftMaster MyQ technology allows you to control your gate simply from your MyQ app enabled smartphone and 828LM Internet Gateway.
SOLAR-READY ULTRA-RELIABLE SYSTEM - Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
PROGRAMMABLE AUXILIARY RELAYS - easily add additional features, such as warning lights/alarms.
SYNCHRONIZED CLOSE - Simultaneously closes gates.
KEYED MANUAL DISCONNECT - When unlocked, allows gate to be operated manually.
INHERENT REVERSING SENSOR - Detects obstructions or increased loads. Reverses gate when closing or tops/reverses the gate when opening.
FIRE DEPARTMENT COMPLIANCE - Allows gate to auto open upon loss of AC power or battery depletion.
SURGE SUPPRESSION - Provides industrial surge and lightning protection against strikes up to 50 feet away.
COMMERCIAL-DUTY CAST ALUMINUM HOUSING WITH HEAVY-DUTY DC MOTOR - Powerful enough to perform in the most demanding applications.
ANTI-TAILGATE - Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt or breaks photo bean. Once vehicle backs up, gate will continue to close.
QUICK CLOSE - Closes the gate immediately after a vehicle pulls off the interrupt loop.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and gate opener accessories. Due to our extensive technical and installation knowledge, we are authorized to sell to the DIY market. If you purchase an LA400 or LA412 gate opener system from Gate Crafters and install it yourself, your warranty eligibility will be recognized by LiftMaster and supported by Gate Crafters. You can access our trained technical staff seven days a week from 9 AM to 9 PM EST. The LA400 and LA412 can be installed with simple household tools and do not require any specialized equipment. The wiring required for installation is simple and straightforward, as it involves only low-voltage wiring.
When you install your gate opener system yourself, you will save thousands of dollars over the life of your gate opener. You will also gain a working knowledge of your gate opener installation and how the system operates. This will make it easier for you to troubleshoot any issues and perform routine maintenance, if needed, in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
“The LiftMaster LA412 and LA412 single solar gate openers are rated up to 850 pounds or gates up to 16 feet in length. The LA412 kits come with your choice of control board enclosures, a 10 watt solar panel, and your choice of transmitters. LiftMaster gives the LA412 a 2 year warranty.
The LA412 has a lockable release that allows you to unlock the arm, so you can manually open your gate. The motor on the LiftMaster LA412 is about 2 and 1/4 inches in diameter and about 4 inches long. The worm drive gear transmission is made up of stainless steel and brass gears. The gear transmission spins a shaft that both controls the screw drive as well as the limit switch system. This shaft is riding on sealed ball bearings. This gate opener has an additional limit switch that tells the gate opener, that the gate has been unlocked. This is a well made gate opener, with the only exception being that the limit switches are electric and not magnetic. This type of limit switch is prone to contamination and may need to be replaced at some point in time.
The LiftMaster LA412 has the option of two different control board enclosures. Each control board enclosure contains the same LiftMaster control board. The control board on the LA412 and LA412 has all of the necessary plugins for any accessories you wish to add to your gate opener. These can include exit wands, exit loops, edge devices, various safety devices, and locks. One down side of this control board is that it is very complex.
The larger control board enclosure, is made to hold a larger battery that you must provide. One downside of this box is that it does not hold a larger group size 24 deep cycle marine battery in this box. A battery of this size will be beneficial to you if live in an area that does not get a lot of sunlight for some periods of time. The standard control board enclosure comes complete with 2 batteries.
When you order from GateCrafters.com, you have the choice to choose the transmitters. Gate Crafters includes 2 transmitters of your choice, you can either receive LiftMaster transmitters or you can choose the Estate Swing transmitters. When you choose the Estate Swing transmitters you will receive an addition receiver. A couple positives of the Estate Swing transmitters is that we have successfully tested them up to ranges of 1400 feet, they are less expensive than the LiftMaster transmitters, and you will be able to use the Estate Swing wireless key pads as well.
Gate Crafters was started in 2002 with the goal of providing our customers with high quality gate openers. Our experts know gate opener inside and out and will be able to answer any questions you may have. We have technical support available 7 days a week from 9 am to 9 pm, eastern time. So please give us a call, send us an email, or use our live chat on our website, we are more welcome to answer any question you may have.”
"I bought my LiftMaster/Chamberlain LA412 in April 2013. I have waited a year to write about it because I wanted to be sure it was a good buy. I couldn't be happier! Installation took me just a couple hours because my gate and posts were already in place. I highly recommend reading the manual from front to back in a comfortable chair before starting. It helped to highlight instructions and pages that were specific to my gate. The gate works perfectly and quietly, every time. The solar charge has lasted me more than 40 openings and closings in a single day, and I'm sure it would go many more if I ever had the need. If you have sun, solar is the way to go!"
-Scott A. from Riverside, CA
"I was very impressed by the quality of the the gate construction and hinges. Equally, installation of the LiftMaster opener was clean and straightforward. After the posts were set, the entire installation took about a half day with the help of a friend. My wife loves it… no more getting in an out of the car! Thanks."
-Greg P. from Alpine, CA
"We bought this gate opener system (LiftMaster / Chamberlain LA-412 Single Swing Solar Gate Opener with solar panel - with Standard Box) in September. It took me so long to install the system because I hurt my back at work. I had my friend help me install the system. I had to install the solar panel about 250 ft away from the gate. I used 12 gauge stranded copper wire. I installed push buttons (door bell buttons) for visitors and emergency personal. The installation was easier than I thought it was going to be."
The LiftMaster INSL24UL 24VDC Heavy-Duty Industrial Single Slide Gate Operator features a brushless DC motor capable of continuous-duty. Operator speed is variable from 0.5 ft./sec. to 1 ft. sec with soft start/stop. The INSL24UL's recommended capacity is rated for gates up to 70 ft. in length and weighing up to 2,200 lbs.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Max Gate Weight: 2,200 lbs. (998 kg)
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Mounting Options: Can be post mounted, or mounted on a MRIN Riser Mount (not included)
Solar Compatible: Yes
Power: 24 VDC Transformer Run/Battery Backup
Power Wire Specification:10, 12, 14 Gauge Wire (sold separately).
Strong metal housing for protection against vandalism
Warranty: LiftMaster 5 Year Commercial Limited Warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
*Disclaimer: The LiftMaster INSL24UL Gate Opener is designed to be post-mounted. If you would like it to be pad-mounted, you will need to purchase and install the LiftMaster MRIN. (Posts and MRIN not included)
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
LiftMaster INSL24UL 24VDC Heavy-Duty Industrial Single Slide Gate Operator
Reliable
The INSL24UL control board has onboard status LED’s that indicate the status of the operator. The quick close feature prevents unauthorized access which stops vehicles from tailgating. Operator is protected by an outdoor rated (NEMA 3R), 12 ga. steel, weatherproof cabinet. The security+ 2.0 receiver can handle up to 50 remote controls to be programmed to the operator.
Powerful
This operator is powered by AC by default and the operator kit includes (2) 12 Vdc, 7AH batteries. The built-in battery backup feature provides standby power during an outage. In AC power mode, batteries are charged in the circuit by the integrated transformer and only require the included (2) 12 Vdc batteries to be installed.
Solar
Solar panels (not included) can also be used to deliver power to the operator and panels can be wired for either 120 Vac or 240 Vac. The included 7AH batteries are only suitable for AC and power standby modes. For solar panel installations (2) 33AH batteries (not included) are strongly recommended for optimal solar performance and must be facing north. Solar application requirements accommodate a minimum of (2) 10 Watt solar panels up to a maximum of (6) 10 Watt solar panels.
*The 33AH application requires battery harness K41-0102-000. The use of photoelectric sensor heaters are not recommended in solar applications.
Safe
The INSL24UL is UL listed with advanced sensors and monitored safety protection devices that are tested together to deliver a secure system. The LiftMaster S505AL monitored small profile resistive edge and LMRRUL monitored retro-reflective photo eye are included with the INSL24UL to provide the entrapment protection which is required for slide gate applications.
*A minimum of two independent monitored entrapment protection devices are required to be installed according to the UL 325 Entrapment Protection Requirements.
Monitored
The myQ Smart Facility Access cloud based solution keeps you up to date and in control of all of the facility’s access points. The ultimate operator for environments such as manufacturing, transportation, municipality, utility, and warehouse locations. Managers with access to the myQ Facility Management Application can monitor entrance and exit access in real-time and track current open/close gate status. This additional feature uses internet connectivity to control the gate from anywhere.
*Requires additional internet gateway unit.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Sync
Synchronizes gate operation and eliminates costly trenching; set speed independently if needed
UL Listed
Tested to the most stringent UL 325 industry guidelines. External entrapment protection devices need to be added to meet UL 325 standards. Your Installer will recommend suitable entrapment protection devices for your installation, such as photoelectric or edge sensors
Gate Safety Sensors
Protect people entering or leaving your gate with safety sensors that stop the gate from closing on obstructions
Safety Reversing
When detecting an obstruction the gate reverses with the inherent reversing sensor and the included monitored safety accessories.
Quick Close Feature Prevent unauthorized access with quick close feature that stops vehicles from tailgating.
Manual Disconnect Allow Unlocked gates to be opened manually with manual disconnect feature.
Gate Battery Backup
Get in and out when the power's out with battery backup.
Usage Classification: Class II, III, and IV Main AC Supply: 120 Vac, 9.3 Amps including accessory outlets -or- 240 Vac, 1.8 Amps System Operating Voltage: 24 Vdc transformer run/ battery backup Accessory Power: 24 Vdc, 1 A max for ON + SW (switched) Solar Power Max: 24 Vdc at 60 Watts max. Maximum Gate Weight: 2,200 lbs. (998 kg) Minimum Gate Travel Distance: 4 feet (1.2 m) Maximum Gate Travel Distance: 70 ft (21.34 m) Maximum Gate Travel Speed: 1 ft./sec Maximum Daily Cycle Rate: Continuous for line voltage, not for solar Maximum Duty Cycle: Continuous Temperature Specifications (with Optional Heater): -40°C to 60°C (-40°F to 140°F) Temperature Specifications (without Optional Heater): -20°C to 60°C (-4°F to 140°F)
*LiftMaster recommends professional installation and only supports products that are being installed or serviced by a professional installer. For installations that are purchased on Gatecrafters.com we can support installation, general troubleshooting, and warranty assistance directly.
*LiftMaster Gate Openers do not come with any remotes from the factory or most other retailers. We give you (2) FREE LiftMaster remotes to work with the built in receiver
Additional items included with second purchase option:
(2) Free LiftMaster Remotes
(1) CAPXS - Smart Video Intercom-S
*Included items depend on purchase selection at check out.
For over a decade Gate Crafters has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. If you purchase a LiftMaster gate opener system from Gate Crafters and install it yourself, your warranty eligibility will be recognized by LiftMaster and supported by Gate Crafters. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. The LiftMaster gate opener can be installed with simple household tools and do not require any specialized tools. Wiring required for the installation is simple and straightforward as it is all low voltage wiring.
When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Words from Senior Application Engineer Anthony Geato
LiftMaster/Chamberlain's domestic operations are located in Elmhurst, IL and maintains a wide reaching branch of international offices. Its manufacturing has been in
Mexico for more than 20 years. In business for over 100 years this company is well known for its garage door, gate operators and other access oriented innovations.
Instant Price Match: Purchase from an authorized dealer of LiftMaster to ensure your warranty is valid! Every Authorized LiftMaster dealer must advertise at their minimum advertised price (MAP). You will always see the minimum advertised price on our site, however we shop our competitors daily. When you click the “instant price match” button above or call (813) 792-9726 we will give you today’s price, with shipping included.
The LiftMaster CSL24UL High-Traffic Commercial Slide Gate Operator is built for reliability and continuous-duty operation. Designed for all commercial facilities, it offers full control and insights through the use of myQ technology. Smart Facility Access and myQ technology help improve warehouse efficiency and productivity.
Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others
Max Gate Weight: 1,500 lbs. (680.4 kg)
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Mounting Options: Mounted on a concrete pad by itself, or with post mounts.
Solar Compatible: Yes
Power: 24 VDC Transformer Run/Battery Backup
Power Wire Specification:10, 12, 14 Gauge Wire (sold separately).
Warranty: LiftMaster 7 Year Residential, 5 Year Commercial Limited Warranty
LiftMaster recommends professional installation and provides direct support to its recognized dealer network. When customers purchase LiftMaster products through Gate Crafters, they receive seven-day installation, technical, and warranty support from us. We also assist with advanced support and warranty replacement directly with LiftMaster.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
The CSL24UL opener is designed for professional installation only. Due to the nature of the 120VAC power, it is essential to have a trained professional, such as a certified electrician, install the gate opener. Gate Crafters does not consider the CSL24UL to be a DIY product.
The LiftMaster CSL24UL High-Traffic Commercial Slide Gate Operator is built for heavy-duty applications, offering reliable performance with a Battery Backup System that ensures uninterrupted access during power outages. Its commercial gear-driven transmission delivers unmatched durability, while smooth start/stop operation and mid-travel reversal extend hardware life. Rated for gates up to 50 feet long or 1,500 lbs., the CSL24UL offers up to 7 days or 100 cycles of operation on battery power and comes with a 5-year commercial and 7-year residential warranty.
Smart technology is at the core of the CSL24UL, featuring integrated myQ® technology for secure remote monitoring and control from anywhere. The industry's only standard wireless dual-gate communication system eliminates costly driveway trenching and synchronizes gate opening/closing, making it ideal for high-traffic areas. Security+ 2.0 technology ensures a strong encrypted signal with extended range, while Quick Close and Anti-Tailgate features enhance property security.
Built for both safety and convenience, the CSL24UL includes UL® listed safety features such as monitored entrapment protection, Fire Department Compliance for automatic gate opening in emergencies, and a manual disconnect for easy operation during power loss. With a durable, commercial-grade design and a variety of accessories, including a retro-reflective photo eye and pressure-sensitive edge, this gate operator is the ultimate solution for secure, efficient, and reliable gate control.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
Warranty: 5 years commercial, 7 years residential.
Smart
myQ® Technology enables you to securely control and monitor your gate operator from anywhere.
Wireless dual-gate communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
Safe and Secure
Safeguards access to property with an encrypted signal to offer extended range with Security+2.0.
Quick Close and Anti-Tailgate quickly secures the property, preventing unauthorized access.
Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
Manual Disconnect when unlocked allows gate to be opened manually.
UL® Listed gate operators with monitored safety entrapment protection devices.
Included Accessories:
LMRRULMonitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
Solar-Ready Ultra-Reliable System delivers power when and where you need it
Accessory Power: 24VDC 500mA output; switched and un-switched power
Commercial-Grade Design
Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
Cover: high-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
UL® Usage Classification: I, II, III, and IV
Operator Weight: 140 lbs.
Dimensions
Height: 25.07”
Width: 15.55”
Depth: 19.51”
Temperature Specifications when Cold
Without heater: -4°F (-20°C)
With heater: (HTR) -40°F (-40°C)
Temperature Specifications when Hot
Without heater: 140°F (60°C)
With heater: (HTR) 140°F (60°C)
Gate Travel Speed
12” per second
Standard Features
Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
Posilock® automatically closes the gate when it is pushed from the closed limit
Monitored Safety Inputs 3 main board, 3 expansion board
Security+ 2.0® On-Board Radio Receiver up to 50 remote controls (unlimited with 811LM/813LM)
Led Diagnostic Display simplifies installation and troubleshooting
Programmable Auxiliary Relays make adding additional features easy
Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
HomeLink® Compatible
Compatibility Bridge™ (not included) necessary for certain vehicles. Visit bridge.liftmaster.com to find out if a Bridge is needed.
HomeLink® is a registered trademark of Gentex Corporation.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
.jpg)
.jpg)
