The E4 Residential Swing Gate Operator offers top-tier performance with a maximum gate capacity of 850 lbs. for 10-foot gates or 550 lbs. for 16-foot gates, operates at speeds of 12-16 seconds per 90°, and features a streamlined control board designed for easy installation of single or dual gates.

• Gate Materials: Wood, Steel, Aluminum, Vinyl, and others.
• Weight and length: Up to 850 lbs. for 10 ft. gates or 550 lbs. for 16 ft. gates
• Max degree of opening: 110 degrees
• Gate Post or Column size (pull to open): 3", 4" or 6" square post
• Push to Open: Yes
• Solar Compatible: Yes (purchased separately)
• Power: 115/230 VAC - 24 V AC/DC
• Power Wire Specification: 10 gauge wire (purchased separately). Maximum distance of 1,000 ft.
• Operating Temperature: -20°F up to +160°F
• Warranty: 3 year manufacturer warranty

Gate Opener Description

Top of Page

 Viking E4 Residential Single Swing Gate Opener

The new E4 Residential Swing Gate Operator leads the industry in being the best, most cost effective residential linear arm actuator. This new design allows for a maximum gate capacity of 850 lbs. for 10-foot gates or 550 lbs. for 16-foot gates. Featuring a convenient manual release handle and pre-wiring for an easy and quick installation. It is ready to be powered with low voltage wiring, allowing installation versatility and accuracy.

Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.

Gate Opener Features

Top of Page

Lightning strike protection Multiple power options (Optional) True battery back-up* UL325 compliant Two monitoring inputs with up to 4 devices per input

120VAC outlet provided Adjustable speed control Fail secure mode Large box option Manual release - mechanical

Multiple power outage options Positive stop limits Onboard solar charger Provided with plug-in transformer Pre-wired 10’ motor cable

Gate Opener Specifications

Top of Page

• Maximum Gate Capacity: Up to 850 lbs. for 10 ft. gates or 550 lbs. for 16 ft. gates
• UL 325 Classification: Class I 
• Duty Cycle: 100% 
• Operating Voltage: 24VDC
• Voltage Current Specs: 120VAC - 2.0 or 240VAC - 1.0 (each motor)
• Main Power Frequency: 50Hz / 60Hz
• Main Power Fuse: 4A Timed
• Alternative Power Source: 24VAC / VDC (60VA) or Solar
• Accessory Power: 24VDC - 750mA
• Power Consumption - Sleep: 6mA
• Motor Current (Typical): 3.0A
• Operating Temperature: -20°F (-28°C) to 160°F (71°C)
• Opening Angle: 110°
• Gate Speed: 13-16 sec./90°
• Battery Backup: 400 Continuous Cycles

Included with the Gate Opener Brand

Top of Page

Estate Swing Kit (1) Viking E4 Operator (1) Viking E4 ECU Single (1) Estate Swing 433ESREC Receiver (2) Estate Swing T18-ES Transmitters (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (2) 6Ah Batteries

Viking FAAC Kit (1) Viking E4 Operator (1) Viking E4 ECU Single (1) Viking FA-XR2C Receiver (2) Viking FA-XT4RC Transmitters (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (2) 6Ah Batteries

LiftMaster Kit (1) Viking E4 Operator (1) Viking E4 ECU Single (1) LiftMaster 850LM Receiver (2) LiftMaster 811LMX Transmitter (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (2) 6Ah Batteries

---

Disclaimer: The "Operator Only" option does not include accessories. Please be advised that if you select "Operator Only," you will receive only the operator.

D⁣IY Installation

Top of Page

For over a decade, Gate Crafters has been the leading online retailer of gate openers and accessories. With our extensive technical and installation expertise, we proudly serve the DIY market. We believe that every customer deserves the chance to take pride in their projects, whether they are installing or troubleshooting their gate openers. Everyone should have access to high-quality products without the need of a professional. At Gate Crafters, we empower you to install with confidence by offering access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to tackle your gate opener system yourself, you can save thousands of dollars over its lifespan while gaining valuable knowledge about your installation and how the system operates. This understanding will not only make troubleshooting easier, but also enable you to perform routine maintenance with confidence in the future.

Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.     DIY Additions Top of Page Order specific customized accessory wiring instructions 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit. Free 24/7/365 Installation Support Free 7 day/week Technical Support Largest Number of Certified Techs in America Free assistance to find the right gate opener for your gate Free systems design assistance to match the right accessories to fit your needs. Extremely competitive pricing Free shipping on all accessories purchased with a gate opener We stock replacement parts Many brands of many types of accessories, enough to handle just about any operational situation you can imagine Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.     Tools & Supplies for Installation Top of Page The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.     Product Media Top of Page

The F1 gate operator has the capacity to operate swing gate up to 1500 lbs. for 12 ft. gates or 1000 lbs. for 16 ft. gates at 100% duty cycle under extreme conditions. This efficient operator provides a solution for high traffic commercial and residential applications. The F1 operator offers efficiency and technology combined in a single package.

• Gate Materials: Wood, Steel, Aluminum, Vinyl, and others.
• Weight and length: 12 ft. at 1500 lbs. or 16 ft. at 1,000 lbs.
• Max degree of opening: 120 degrees
• Gate Post or Column size (pull to open): Gate Post must have a maximum of 3.00" OD pipe.
• Push to Open: No
• Solar Compatible: Yes (purchased separately)
• Power: 120/240 VAC Single Phase
• Power Wire Specification: 10 gauge wire (purchased separately). Maximum distance of 500 ft.
• Operating Temperature: -20°F up to +160°F
• Warranty: 5 year manufacturer warranty

Gate Opener Description

Top of Page

 Viking F1 VA-F1NX Single Swing Gate Opener

The F1 VA-F1NX Swing Gate Operator, includes the V-Flex control board and a removable power supply box for low voltage wiring. The removable power supply box allows you to run low voltage to the gate operator rather than high voltage which removes the need to trench high voltage wires. This can save the home or business owner thousands in labor and permit costs.. The V-Flex control board provides a LCD display for diagnostics and operator status. The new 1/4" steel chassis allows an increased handling capacity for gates up to 1500 lbs. The F1 operator also features Viking's soft-start/soft-stop, built-in heater and Viking's true battery backup system. Smooth gate operation, compliant to both ETL and UL standards makes the F1 operator the ideal choice for your gate automation needs.

Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.

Gate Opener Features

Top of Page

Adaptive motor control Built-in loop rack Built-in thermostat controlled heater Built-in voltmeter Lightning strike protection Multiple power options

On-board display True battery back-up UL325 compliant Two monitoring inputs with up to 4 devices per input 120VAC outlet provided Adjustable speed control

Anti-tailgating feature Fail secure mode Fail safe mode Manual release - Mechanical Multiple power outage options Two 4Ah batteries included

Gate Opener Specifications

Top of Page

• Maximum Gate Capacity: 12 ft. at 1500 lbs. or 16 ft. at 1000 lbs.
• UL 325 Classification: Class I, II, III, IV
• Duty Cycle: 100% 
• Operating Voltage: 24VDC
• Voltage Current Specs: 120VAC - 2.5A or 240VAC - 1.5A
• Main Power Frequency: 50Hz / 60Hz
• Main Power Fuse: 4A Timed
• Alternative Power Source: 24VAC / VDC (60VA) or Solar
• Accessory Power: 24VDC - 750mA
• Power Consumption - Idle: 70mA
• Motor Current (Typical): 4.0A
• Operating Temperature: -20°F (-28°C) to 160°F (71°C)
• Opening Angle: 120°
• Gate Speed: 13-16 Seconds per 90°
• Battery Backup: 400 Continuous Cycles

Included with the Gate Opener Brand

Top of Page

The X390 Swing Gate Operator has a compact design that is perfect for limited spaces. It features an adjustable timer, built-in battery backup for 800 cycles, and an LCD display for diagnostics, while supporting up to 600 lbs. for 14-foot gates.

• Gate Materials: Wood, Steel, Aluminum, Vinyl, and others.
• Weight and length: 14 ft. at 600 lbs. per leaf
• Max degree of opening: 120 degrees
• Gate Post or Column size (pull to open): 3", 4" or 6" square post
• Push to Open: Yes
• Solar Compatible: Yes (purchased separately)
• Power: 120/240 VAC Single Phase
• Power Wire Specification: 10 gauge wire (purchased separately). Maximum distance of 1,000 ft.
• Operating Temperature: -20°F up to +131°F
• Warranty: 3 year manufacturer warranty

Gate Opener Description

Top of Page

 Viking X390 Dual Swing Gate Opener

The Viking X390 Swing Gate Operator features adjustable timer for automatic closure, high efficiency power supply, a built-in three push button station, built-in battery backup capable of 800 cycles in case of power failure, and on-board lightning protection. The X390 is powered by the V-Flex control board, including speed control and diagnostic LCD display. This aesthetic operator is solar efficient and ready to be powered with  low voltage wiring, allowing versatility of installations. This operator can be mounted directly to a column, making it a very popular option for homeowners that do not have the space for a pad mounted gate opener. The X390 has UL 325 and 991 safety listings. 

Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.

Gate Opener Features

Top of Page

Adaptive motor control Built-in thermostat controlled heater Built-in voltmeter Lightning strike protection Multiple power options True battery back-up

UL325 compliant Two monitoring inputs with up to 4 devices per input Adjustable speed control Anti-tailgating feature Fail secure mode Large box option

Manual release - Mechanical Multiple power outage options Two 4Ah batteries included Positive Stope Included Pre-wired 10’ motor cable

Gate Opener Specifications

Top of Page

• Maximum Gate Capacity: 14 ft. at 600 lbs. per leaf
• UL 325 Classification: Class I, II, III, IV
• Duty Cycle: 100% 
• Operating Voltage: 24VDC
• Voltage Current Specs: 120VAC - 1.5A or 240VAC - 1.0 (each motor)
• Main Power Frequency: 50Hz / 60Hz
• Main Power Fuse: 4A Timed
• Alternative Power Source: 24VAC / VDC (60VA) or Solar
• Accessory Power: 24VDC - 750mA
• Power Consumption - Sleep: 34mA
• Motor Current (Typical): 2.0A
• Operating Temperature: -20°F (-28°C) to 131°F (55°C)
• Opening Angle: 120°
• Gate Speed: 10-13 sec./90°
• Battery Backup: 400 Continuous Cycles

Included with the Gate Opener Brand

Top of Page

Estate Swing Kit (2) Viking X390 Operator (1) Viking ECU Dual (1) Estate Swing 433ESREC Receiver (2) Estate Swing T18-ES Transmitters (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (1) Viking DJBK Junction Box (1) Viking VA-CB16 6 Conductor Cable (2) 4Ah Batteries

Viking FAAC Kit (2) Viking X390 Operator (1) Viking ECU Dual (1) Viking FA-XR2C Receiver (2) Viking FA-XT4RC Transmitters (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (1) Viking DJBK Junction Box (1) Viking VA-CB16 6 Conductor Cable (2) 4Ah Batteries

LiftMaster Kit (1) Viking X390 Operator (1) Viking ECU Dual (1) LiftMaster 850LM Receiver (2) LiftMaster 811LMX Transmitter (1) Viking FA-XP30-10K Photocell (2) Viking FA-XP30AC Photocell Conduit Adapters (1) Viking DJBK Junction Box (1) Viking VA-CB16 6 Conductor Cable (2) 4Ah Batteries

---

Disclaimer: The "Operator Only" option does not include accessories. Please be advised that if you select "Operator Only," you will receive only the operator.

D⁣IY Installation

Top of Page

For over a decade, Gate Crafters has been the leading online retailer of gate openers and accessories. With our extensive technical and installation expertise, we proudly serve the DIY market. We believe that every customer deserves the chance to take pride in their projects, whether they are installing or troubleshooting their gate openers. Everyone should have access to high-quality products without the need of a professional. At Gate Crafters, we empower you to install with confidence by offering access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to tackle your gate opener system yourself, you can save thousands of dollars over its lifespan while gaining valuable knowledge about your installation and how the system operates. This understanding will not only make troubleshooting easier, but also enable you to perform routine maintenance with confidence in the future.

Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.     DIY Additions Top of Page Order specific customized accessory wiring instructions 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit. Free 24/7/365 Installation Support Free 7 day/week Technical Support Largest Number of Certified Techs in America Free assistance to find the right gate opener for your gate Free systems design assistance to match the right accessories to fit your needs. Extremely competitive pricing Free shipping on all accessories purchased with a gate opener We stock replacement parts Many brands of many types of accessories, enough to handle just about any operational situation you can imagine Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.     Tools & Supplies for Installation Top of Page The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.     Product Media Top of Page