The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The Estate Swing Cell Phone Access Receiver Compatibilities: All gate openers. For 24-volt gate openers, a 12-volt transformer will be needed (not included). This also requires a 4G SIM card from T-Mobile.
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing Cell Phone Access Receiver is the ultimate in versatility and convenience for remote opening of any gate opener. This receiver totally eliminates the necessity of
purchasing or carrying extra remotes because it provides access to the gate opener through an item most people already carry - a cell phone. Simply dial the receiver number and, through
caller ID, the receiver will recognize the programmed number(s) and open the gate. This is more secure than traditional remotes because the number has to be programmed into the
receiver to operate it, so there is less of a chance that unauthorized persons will be able to operate the gate.
It's convenient for small apartment complex managers and their residents since the residents' numbers can be programmed into the receiver so the manager doesn't need to purchase and
hand out extra remotes. Similarly, because so many numbers can be programmed into the receiver, each member of the family, plus friends, extended family, and others, can operate the
receiver easily and conveniently.
It works this way. Purchase a GSM SIM card from T-Mobile. Customers can purchase pay-as-you-go cell numbers (disposable phones for example) or add
another line to the current cellular plan. The intercom will then receive commands from authorized users via cell signal. No minutes are used as it doesn't actually answer the calls - it utilizes
caller ID to allow access.
Finally, the range of this receiver is truly unlimited, so long as there is a cell tower available to receive and transmit the call. This is particularly beneficial in areas that have a great deal of
interference for traditional radio transmitters and receivers, or for users who wish to open the gate from extended distances (such as from home, garage, or lengthy driveway). The Estate
Swing Cell Phone Access Receiver allows the user to avoid all that while providing a simple, secure, and convenient means of operating the gate opener.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example:
easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have
the largest staff of factory trained technicians in the US.
Cool Feature: When the gate is activated, the receiver can be programmed to send a text message to administrators. You can customize that message too.
Unlimited Range: So long as there is an operational cell tower and there is no interference with the signal, the range is unlimited for this receiver. It is possible to call the
receiver from across the country and it will operate the gate.
Programmable Caller ID: The receiver permits access through caller ID; up to 99 different numbers can be programmed into the receiver's caller ID. Users simply call the
receiver's number (determined by the SIM card; not included) and it opens upon recognition of the number. Because the receiver does not pick up the call, no minutes are used. One
method is that users purchase a go-phone or track phone with a SIM card so the SIM card has a number attached to it; users may also add an extra line to their current cell phone service
and use a SIM card for the extra line.
Easy to Install: This receiver runs right off the control box power source, so installation is simple.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
