The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
In the world of automatic gate openers, a common new feature you’ll see is as a gate closes it slows down for the last few feet instead of banging shut. This reduces the banging noise as well as takes stress off the physical components of the gate and gate opener.
One problem with this feature is the lack of momentum as the gate closes reduces the amount of weight hitting the lock to below the weight needed for the gate to fully close and lock. Instead, the gate latches rest on top of each other without fully locking, leaving your gate unprotected against forced entry and wind.
What separates the Estate Swing lock from the rest of the competition is that it requires less than 1 pound of weight for the gate to lock. Other locks require approximately 5 pounds of weight, which is no longer generated from the momentum of the gate because of the slow down feature.
Another benefit of the Estate Swing lock is the unique pivot design reduces power consumption. The older model locks require 3 amps to pull the latch open because they pull back on a direct linear path. The Estate Swing lock requires less than 1 amp because it works on a swivel, making the pulling action much easier.
The reduction in power required for the lock means less strain is put on the system as a whole as power is distributed through the motor and control board. Since less power is then required from the system, you can reliably active and run the motor, power accessories, get a longer life span from battery systems, and will not stress the circuitry of the control board of the gate opener.
The best features of the new Estate Swing Lock, however, are that it is compatible with all of our gate opener models here at GateCrafters.com and it comes with a 2yr warranty!
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Consistant Locking: Requiring only 1lb of force, your gate is sure to lock every time it closes.
Compatiblility: Compatible with any gate opener from GateCrafters.com.
2yr Warranty:The longest warranty for any solenoid gate lock.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Words from Senior Application Engineer, Anthony Gaeto
“The are multiple type of driveway gate locks available on the market today. The main two types of gate locks are solenoid locks and electromagnetic locks. Each type of gate lock has it advantages and disadvantages.
Before we discuss gate locks, I’d like to go over pin locks. These locks are made to lock your gate opener to the post or to your gate so that it helps prevent theft of your gate opener. These are simple devices that fit into the mounting locations on your gate opener, in place of the bolts that are provided in your gate opener kit.
Now let us talk about gate locking devices. The most popular type of gate locking device is the solenoid gate lock. All of these locks come with a control board and adequate an amount of wire needed to connect the gate lock to either the control board or to the master control board of your gate opener. These locks do not come with mounting hardware as each application will be unique to your gate.
We carry 3 brands of solenoid gate locks. The Estate Swing gate lock and Gate Crafters gate lock are essentially the same unit.
The GTO/PRO lock features a different type of locking tab when compared to the Estate Swing and Gate Crafters locks. The GTO/PRO locking tab has to slide back inside the unit, and this requires about 5 pounds of force to accomplish. One downside of this gate lock is that in heavy wind conditions the pin may become trapped behind the tab. Also if your gate opener has a soft stop feature, it needs to be disabled as there will not be enough force to latch the gate.
The Estate Swing and Gate Crafters lock feature a rolling type latch that takes minimal force to operate. The locking tab folds back into the unit and allow for easy locking and unlocking. In high wind conditions this lock will function the way it was intended, as the locking tab has a smooth back.
GTO/PRO also has a push to open/ open position gate lock. This is the exact same lock as the regular GTO/PRO gate lock, but it is made to either lock your gate in the open position or to be used as a push to open gate lock. To use this lock as a push to open gate lock, you will need to plan ahead with the installation however.
Gate Crafters also sells an electromagnetic gate lock. This gate lock is not compatible with solar gate opener because it is constantly drawing power. Also it the gate lock’s wire is cut, it will essentially turn this gate lock into a brick. This is due to the fact that this lock needs a constant source of electricity to function. This gate lock is ideal for high wind areas where you do not want to worry about your gate hanging up on your lock.
Please visit our FAQ page on our website for any additional questions regarding gate locks. If you do not see your question on our FAQ page please email me and I will quickly answer your question.
GateCrafters.com is your one stop shop for gates, gate openers, and gate accessories. We have technical support 7 days a week from 9 am to 9 pm, eastern time. Please give us a call, send us a email, or use the live chat on our website, so our experts can help you find the right accessories for your gate and gate opener.”
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
This unit is a complete solar alternative kit. Complete with stand and wire, this kit replaces the need for a 110v connection. The solar panel trickle charges the battery the same as the 110v connection. It is perfect for remote locations, long driveways, or energy conservative individuals. Solar energy is the cleanest, safest form of power available; using the sun for energy benefits the environment as well as your wallet and eliminates the concern of power outages.
The solar panel is completely weatherproof and virtually indestructible. Estate Swing's non-glass solar panels feature a clear front covering and are mounted to an anodized aluminum frame. The heart of the solar panel is the collection of solar cells, which optimizes the amount of energy absorbed even in low light situations. Each cell transforms the sunlight into energy through a photovoltaic process (converting photons into electrons). Working as a cohesive unit these cells can generate electricity that will work with solar compatible gate opener systems. As a rule of thumb; heavier gates and/or more frequent cycles (a cycle is defined as one open and closure) the more solar wattage you’ll need. Review your gate opener manual for information on which panel would best suit your needs.
*Make and model may vary from picture above.
Optimum Orientation for Solar Panels: (Your Latitude x 0.9)+ 29 Degrees= # of degrees your panel should be angled towards true South from the horizontal position (laying flat pointing directly up)
Gate Crafters is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
No Power Consumption: Environmentally beneficial - collects sun's energy and creates electricity
Outdoor ready: Weatherproof, ready to be used in all conditions
10 Year Warranty: Comes with a standard 10 year warranty
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
When it comes to keeping your automated gate safe a GateCrafters Infrared sensor is the way to go. Have peace of mind knowing your family and vehicle will be protected from the occasional mishap that can sometimes occur. One or two carefully placed sensors can keep your automatic gate opener from closing accidentally on a vehicle or more importantly on a person.
Having a wired sensor is more reliable and you don't need to worry about changing batteries. The GateCrafters Infrared sensor can be powered with 12/24 DC or AC voltage which can be conveniently powered off any GateCrafters low voltage automatic gate opener. With over a 30-foot range, this sensor can be used on virtually any residential or commercial driveway.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Reliable: Egg shape deflects snow and rain from sensor
Range: 30' range
Easy to install: Wired into all gate openers
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
