The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
When it comes to keeping your automated gate safe a GateCrafters Infrared sensor is the way to go. Have peace of mind knowing your family and vehicle will be protected from the occasional mishap that can sometimes occur. One or two carefully placed sensors can keep your automatic gate opener from closing accidentally on a vehicle or more importantly on a person.
Having a wired sensor is more reliable and you don't need to worry about changing batteries. The GateCrafters Infrared sensor can be powered with 12/24 DC or AC voltage which can be conveniently powered off any GateCrafters low voltage automatic gate opener. With over a 30-foot range, this sensor can be used on virtually any residential or commercial driveway.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Reliable: Egg shape deflects snow and rain from sensor
Range: 30' range
Easy to install: Wired into all gate openers
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The EMX NIR-50 Retro-Reflective Photo Eye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers. Flexible voltage 12 – 240 Volts DC, 24 – 240 Volts AC. It is watertight package for reliable outdoor installation, has 2 LED indicators and offers sensitivity adjustment. Bracket and mounting hardware are included.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Range - The NIR-50 has an extended range of 50 feet providing better performance in rain and snow.
Low Current - In addition, the low current draw of only 28mA makes the NIR-50 an excellent choice for solar and
low voltage applications
Protection - The watertight package and an optional protective hood offers protection for the NIR-50 from
the elements and vandalism.
Reliability - The output relay is normally energized, and should the NIR-50 photo eye lose power it will fail into
detect mode.
Installation - The installation hardware, bracket and instructions are included.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The UltraIIDTEK™ vehicle loop detector is compatible with most gate operators. The UltraIIDTEK™ may be used in Center, Safety, and Exit loop positions. The UltraMETER™ display feature makes setup easy by displaying the optimum sensitivity setting required to detect a vehicle positioned on the loop. Ten sensitivity settings allow for fine adjustment of detection level. A PULSE/PRESENCE switch allows configuration of output relay for presence or one second pulse on entry operation. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications.
Sensitivity: 10 levels, 0-9
UltraMETER™ Display: Indicates optimum sensitivity level, 0-9 diagnostic aid
Loop Frequency: 4 settings
Loop inductance: 20 - 200μH
Grounded Loop: Isolation transformer allows operation with poor quality loops
Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
Environmental Tracking: Automatic compensation
Surge Protection: Loop circuitry protected by surge suppressors.
Detect Output: COM, NO and NC contacts
Power / loop fault indicator: Green LED
Detect / frequency count indicator: Red LED
ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Relay Operation: Presence or one-second pulse on entry
Dimensions: 3" length x 0.9" width x 2 3/4" height
Weight: 0.15 lbs
Connector: 7 position male
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We
have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of
accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians
in the US.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the
only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write
DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Words from Senior Application Engineer, Anthony Gaeto
“We are always getting questions about how gate exit wands work and how they are different from exit loops.
Exit wands are what is know as a magnetometer which senses changes in the Earth’s magnetic field. An easy way to explain how exit wands work is to picture a boat traveling through the water. As the boat is traveling it is creating waves. As your car travels through the magnetic field of the Earth it creates similar waves, like the boat. The exit wand’s magnetometer picks up on these waves as you travel by the wand. One downside of exit wands is that they do loose sight of your vehicle when it is stopped.
Gate Crafters carries 5 different types of exit wands that work very similar to each other. The only difference between these wands are some of their features. The GTO/PRO wireless exit wand is wireless between the magnetometer and receiver. The Gate Crafters exit wand is manufactured by EMX and has been around for years. The GTO exit wand is recommend for use with other GTO openers and accessories. The Estate Swing exit wand does come with a range control board that allow you to adjust the sensitivity of the magnetometer. This feature allows you tune down the range of the exit wand, so that vehicles such as a lawn mower doesn’t set open your gate, but this isn’t a complete failsafe, as it will still operate the gate opener when something is nearby. The Estate Swing Deluxe Exit wand is the most different from the other exit wands. It is constructed out of copper and features a ground cable that attach to a grounding rod that helps protect this exit wand from lightning strikes. The other 4 exit wands do not have this feature and are susceptible to damage from lightning strikes. Also the Estate Swing Deluxe Exit Wand comes with a 5 year warranty, which is longer than any other exit wand we sell.
Exit loops differ from exit wands in that they are buried in the driveway in a loop and are wire to the gate opener. The way exit loops work is that they detect the presence of metal (your car) above the loop. It does not matter if your car is moving or not, the loop will detect the car. Besides being used to exit your property, exit loops are used for safety. When exit loops are used a safety device, they will prevent your gate from closing on your car, when it detect a car nearby to your gate. The exit loop is wired to a exit loop detector, which is then wired into your gate opener’s control board.
GateCrafters.com is a one stop shop for gate openers and gate accessories at a great price. Gate Crafters was started on the idea of providing gate opener and accessories along with great customer service to our valued customers. We have technical support available to you 7 days a week from 9 am to 9 pm, eastern time. Our experts are standing by to take your phone call, answer your email, or chat with you with our live chat on our website. We welcome any question you may have and can help you put together a complete package for you so your gate operates how you want it to. We look forward to hearing from you."
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and
have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we
pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you
see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on
these ideas and have utilized them to help thousands of customers automate their gates.
