The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The Estate Swing Cell Phone Access Receiver Compatibilities: All gate openers. For 24-volt gate openers, a 12-volt transformer will be needed (not included). This also requires a 4G SIM card from T-Mobile.
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing Cell Phone Access Receiver is the ultimate in versatility and convenience for remote opening of any gate opener. This receiver totally eliminates the necessity of
purchasing or carrying extra remotes because it provides access to the gate opener through an item most people already carry - a cell phone. Simply dial the receiver number and, through
caller ID, the receiver will recognize the programmed number(s) and open the gate. This is more secure than traditional remotes because the number has to be programmed into the
receiver to operate it, so there is less of a chance that unauthorized persons will be able to operate the gate.
It's convenient for small apartment complex managers and their residents since the residents' numbers can be programmed into the receiver so the manager doesn't need to purchase and
hand out extra remotes. Similarly, because so many numbers can be programmed into the receiver, each member of the family, plus friends, extended family, and others, can operate the
receiver easily and conveniently.
It works this way. Purchase a GSM SIM card from T-Mobile. Customers can purchase pay-as-you-go cell numbers (disposable phones for example) or add
another line to the current cellular plan. The intercom will then receive commands from authorized users via cell signal. No minutes are used as it doesn't actually answer the calls - it utilizes
caller ID to allow access.
Finally, the range of this receiver is truly unlimited, so long as there is a cell tower available to receive and transmit the call. This is particularly beneficial in areas that have a great deal of
interference for traditional radio transmitters and receivers, or for users who wish to open the gate from extended distances (such as from home, garage, or lengthy driveway). The Estate
Swing Cell Phone Access Receiver allows the user to avoid all that while providing a simple, secure, and convenient means of operating the gate opener.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example:
easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have
the largest staff of factory trained technicians in the US.
Cool Feature: When the gate is activated, the receiver can be programmed to send a text message to administrators. You can customize that message too.
Unlimited Range: So long as there is an operational cell tower and there is no interference with the signal, the range is unlimited for this receiver. It is possible to call the
receiver from across the country and it will operate the gate.
Programmable Caller ID: The receiver permits access through caller ID; up to 99 different numbers can be programmed into the receiver's caller ID. Users simply call the
receiver's number (determined by the SIM card; not included) and it opens upon recognition of the number. Because the receiver does not pick up the call, no minutes are used. One
method is that users purchase a go-phone or track phone with a SIM card so the SIM card has a number attached to it; users may also add an extra line to their current cell phone service
and use a SIM card for the extra line.
Easy to Install: This receiver runs right off the control box power source, so installation is simple.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
The Linear AK-11 Exterior Digital Keypad is a self-contained keyless entry system designed for secure access control in commercial and industrial environments. Ideal for locations such as airports, hospitals, warehouses, office buildings, and parking facilities, it features a rugged cast aluminum enclosure for wall or pedestal mounting. Its die-cast keys with bright graphics and built-in courtesy lighting ensure easy visibility and operation, even at night.
Offering advanced functionality, the AK-11 supports up to 480 programmable entry codes and includes two relay outputs for flexible control options. Features like request-to-enter input, anti-passback security, and alarm shunt output enhance safety and convenience. With solid-state outputs, lockout indication, and EEPROM memory for code retention during power loss, this keypad delivers reliable performance in demanding access control applications.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Two form C relays and two solid-state open collector outputs
Unique programming per entry code
Up to 480 programmable input codes of one to six digits with each code activating either or both relays
Two LED indicators show system status
Door sense input
Inhibit input
Request-to-exit input
Alarm shunt output
Timed anti-passback
Keypad lockout
Programmable courtesy light illuminates keypad for 1, 2, 3, or 4 minutes
Tactile and audible feedback
Keylock secures keypad to mounting backplate
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Words from Senior Application Engineer Anthony Geato
"The Linear Access 2-Channel Digital Keypad is a wired keypad that provides a high level of security. It can also be paired with the AP-5 receiver, allowing it to wirelessly communicate with the Linear Access MDKP and Linear Access transmitters. The keypad includes built-in illumination for easy nighttime access.
This rugged unit is designed for commercial applications or residences where security is a top priority. Its cast aluminum body houses two built-in relays that can be programmed for additional security options, such as a “door sense” switch to detect forced entry or ajar doors. It also includes an input for a request-to-enter feature, making it easy to integrate a push button or fire access keypad. This keypad is ideal for those who require high security while maintaining an attractive design.
Gate Crafters was founded with the goal of providing customers with high-quality gate openers and accessories. Choosing the right keypad or accessory can be just as important as selecting the right gate opener. Our experts are available seven days a week to assist you with any questions or concerns. Contact us by phone, email, or live chat on our website. We’re here from 9 AM to 9 PM Eastern Time and look forward to helping you."
Outdoor plug cover to keep your transformer safe from water. All low voltage gate openers have transformers that cannot be used outdoors without covering, this product will keep your transformer covered.
Standard 2 3/4" Depth
Weatherproof Cover
Configurations include multiple combinations of:
duplex, GFCI, switch, 1 3/8" round, 1 5/8" round, 1 3/4" round, 2 1/4" round, and 2 5/8" round UL Listed
In order to accommodate transformers you will use the center two plug set-up backing (included) instead of the double gang backing.
Gate Crafters 16 Gauge, 2 Conductor Wire (1000 ft. Roll)
The Gate Crafters conductor wire is ideal for connecting gate opener transformers or adding accessories to your system. It features durable double insulation, is UV-resistant, and can be directly buried in the ground. The wire is flexible, easy to strip, and handles bends without breaking, making installation hassle-free. Available in any quantity, this wire completes your installation kit with reliable, long-lasting performance.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Durable: This wire is double-insulated, UV-resistant, and can be directly buried in the ground.
Convenient: Available in any quantity at a great price, and can be delivered with your gate opener or accessory. It completes your gate opener kit and provides everything you need for installation.
Easy to work with: Some wire can be a pain to strip, too stiff to conform to necessary twists and turns, or prone to breaking after bending. This wire, however, can be bent repeatedly, easily shaped to your needs, and a standard pair of wire strippers makes preparation quick and easy.
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
