The Estate Swing 433 Mhz remote is compatible with:
New Apollo (only when purchased through gatecrafters.com) and Estate Swing gate openers. Existing Estate Swing openers from 2012 or newer. Any devices paired with the 433ESREC receiver.
The Estate Swing gate opener 4 button remote control is considered one of the premium remotes in comparison with current available gate openers. Featuring a range that most of the time exceeds 300 feet, the Estate Swing 4 button remote adds a new level of reliability to your gate opener system. This remote can be used from your car, motorcycle, pocket, purse and many times even from your house if it is within range (NOTE: Always make sure you can see the gate and are aware of anyone near it when activating the gate opener for safety purposes).
This transmitter is compatible with our Estate Swing Receiver that can learn up to 400 codes. Each button on this remote sends a unique code. You can learn each button to a different receiver or you can learn all four buttons to the same receiver. Each button learned to the receiver will count as one code used out of the 400 available.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive
components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation
of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Visor Clip: The visor clip is designed to slide onto most sun visors of most model cars or trucks.
Key Ring Holder: Remove the clip and add the remote to your key chain for walks or motorcyclists.
Strong Range: The remote has a range of 300 feet, with a powerful 433 MHz frequency this remote will be very reliable for entry and exit.
Learning code: With the press of a button the new remote is learned into the receiver. No need to match dip switches with old remotes.
Size: At 1/2" D x 1 1/4" W x 2" H this remote is about the same size as many automobile key chain remotes.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a
real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual
instructions for each
accessory to be installed with each gate opener.
Single Button: Operates one gate opener or garage door opener (when matching with compatible
receiver).
Note: If your gate is out of range from your garage door or multiple gate opener then a single button can be used to operate both.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we
attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are
what have led to us
having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major
impacts. We acted on
these ideas and have utilized them to help thousands of customers automate their gates.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Unlighted button for entry or exit. Connects directly to the control board using 16 gauge stranded, low voltage, direct burial wire (not included).
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Outdoor Use: can be wired into an area unprotected from weather
Simple: simple 2 wire installation
Low cost: add as many as needed to activate your gate from multiple locations
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The EMX NIR-50 Retro-Reflective Photo Eye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers. Flexible voltage 12 – 240 Volts DC, 24 – 240 Volts AC. It is watertight package for reliable outdoor installation, has 2 LED indicators and offers sensitivity adjustment. Bracket and mounting hardware are included.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Range - The NIR-50 has an extended range of 50 feet providing better performance in rain and snow.
Low Current - In addition, the low current draw of only 28mA makes the NIR-50 an excellent choice for solar and
low voltage applications
Protection - The watertight package and an optional protective hood offers protection for the NIR-50 from
the elements and vandalism.
Reliability - The output relay is normally energized, and should the NIR-50 photo eye lose power it will fail into
detect mode.
Installation - The installation hardware, bracket and instructions are included.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
A giant leap forward in gate opener technology! The Nice/Apollo 1050 control board is built to make your life easier, at least when it comes to worry free driveway gate access. This control board can be used with the following gate openers:
Apollo 1550
Apollo 1650
Apollo 3500
Apollo 3600
Apollo NT-T5
Apollo NT-T7
NT-M12ETL
NT-H12ETL
Apollo 7200
Apollo 7300
Why add this board to your Apollo order?
This board has some amazing features. It has a built in multi-meter to tell you your battery voltage, transformer voltage, and amperage pull of your motors for diagnostics. It has full range of speed adjustment to control how fast the motors open, close, and soft stop. It is a DIY friendly board that won’t allow you to make mistakes such as reversing polarity - it simply indicates with a red light your polarity is wrong and you can then correct it. The board has clear markings for all the terminals and the settings are all done digitally by display with actual words to indicate what function you are performing, not just codes and numbers.
**US version must be used with monitored photo eyes.
At Gate Crafters we are committed to providing easy to understand content to eliminate confusion when purchasing a product. We cut through the version confusion to help you find the correct replacement part for your needs. Since we, like most other suppliers, do NOT allow for returns of electronic parts, we go the extra step to to make sure you get the correct product for your project. The parts we sell are designed to work with all gate openers of the specific generation. CAUTION: Not all boards & parts sold online are 100% compatible even if they are the same generation, whereas our are GUARANTEED to be compatible with all versions of the indicated generation.
