The Gate Crafters long range pack when wired is compatible with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Gate Crafters long range package is a must for anyone with a large ranch or wants to be able to operate their gate wirelessly from inside their house. It's simple, reliable, and convenient. It can be wired into almost any system very easily. All the GateCrafters carried gate openers are compatible with this receiver. You do not have to remove any existing receivers to use this one, two receivers can be used simultaneously.
The range is a huge advantage of this receiver. It can receive signals through walls, trees, and over hills. The obstacles may shorten the range some from the 1500 feet but it will still be a longer range than any standard remote. Running wire is a time consuming task and if you simply want a way to open your gate from your house wirelessly this is the way to do it.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Long Range: Works for up to 1500 feet. This gives the ability to open your gate from a very long distance away wirelessly.
Complete package: Comes with both the receiver and remote. Extra remotes can be purchased.
Works simultaneously: This will not make your short range remotes work long range; but it won't interfere with them either. You can use both the long range package at the same time as the short range without issue.
Size: At 2"x 3"x 3/4" it easily mounts in most gate opener control boxes or can also be placed in a weatherproof electrical box found at most home stores in the electrical isle.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
The Linear AK-11 Exterior Digital Keypad is a self-contained keyless entry system designed for secure access control in commercial and industrial environments. Ideal for locations such as airports, hospitals, warehouses, office buildings, and parking facilities, it features a rugged cast aluminum enclosure for wall or pedestal mounting. Its die-cast keys with bright graphics and built-in courtesy lighting ensure easy visibility and operation, even at night.
Offering advanced functionality, the AK-11 supports up to 480 programmable entry codes and includes two relay outputs for flexible control options. Features like request-to-enter input, anti-passback security, and alarm shunt output enhance safety and convenience. With solid-state outputs, lockout indication, and EEPROM memory for code retention during power loss, this keypad delivers reliable performance in demanding access control applications.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Two form C relays and two solid-state open collector outputs
Unique programming per entry code
Up to 480 programmable input codes of one to six digits with each code activating either or both relays
Two LED indicators show system status
Door sense input
Inhibit input
Request-to-exit input
Alarm shunt output
Timed anti-passback
Keypad lockout
Programmable courtesy light illuminates keypad for 1, 2, 3, or 4 minutes
Tactile and audible feedback
Keylock secures keypad to mounting backplate
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Words from Senior Application Engineer Anthony Geato
"The Linear Access 2-Channel Digital Keypad is a wired keypad that provides a high level of security. It can also be paired with the AP-5 receiver, allowing it to wirelessly communicate with the Linear Access MDKP and Linear Access transmitters. The keypad includes built-in illumination for easy nighttime access.
This rugged unit is designed for commercial applications or residences where security is a top priority. Its cast aluminum body houses two built-in relays that can be programmed for additional security options, such as a “door sense” switch to detect forced entry or ajar doors. It also includes an input for a request-to-enter feature, making it easy to integrate a push button or fire access keypad. This keypad is ideal for those who require high security while maintaining an attractive design.
Gate Crafters was founded with the goal of providing customers with high-quality gate openers and accessories. Choosing the right keypad or accessory can be just as important as selecting the right gate opener. Our experts are available seven days a week to assist you with any questions or concerns. Contact us by phone, email, or live chat on our website. We’re here from 9 AM to 9 PM Eastern Time and look forward to helping you."
The Gate Crafters universal weatherproof stand-alone keypad and proximity card reader is great for any secure access area. Businesses and residential areas alike will enjoy the speed and convenience of proximity cards. The device maybe used with gate openers, garage door openers, electric locks, electric door strikes, and other electronically controlled access devices.
Words from our senior application specialist Anthony Gaeto:
"The Gate Crafters proximity card reader and keypad is a great installment for any gate or door that is going to be used in a situation where a lot of people will be coming in and out and you want the convenience of not having everyone type in a code.
At only $2.00 per card, it is a great advantage to buy your employees proximity cards over remotes and they will appreciate the convenience of simply swiping a card by the face. And with a keypad as well, the guests to the property that do not have cards will still have access through a code if you choose to give them one.
The keypad was designed by a manufacturer that works closely with solar products so they have made sure to keep the energy consumption to a minimum; making this keypad a great choice for solar applications.
We take great pride in knowing our accessories and understanding how they work. The Gate Crafters Proximity card reader/keypad has been thoroughly tested by myself and my team and meets our high standards for recommended accessories."
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Stand-alone unit: Appropriate for use on gates or doors where there is need for resistance to climatic conditions
Weatherproof: Fully weatherproof, no cover is needed
Capacity: 2000 Card capacity and 8 passcode capacity
Capabilities: Party Mode
Frequency: 125KHz / 13.56MHz
Power: 12V DC supply (not included)
Solar: Can be used on solar installations
Options: Has the option of using a built-in contact for doorbell enunciators.
Versatile: Use it as a keypad for some users and as a proximity card reader for others
Low cost: Low cost alternative to transmitters for multiple user access
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Words from Senior Application Engineer, Anthony Gaeto
“The Gate Crafters Proximity Card Keypad is a unique keypad that offers advantages other keypads don’t. This key pad uses proximity cards to communicate to the control board to open your gate. The keypad has a capacity of storing up to 2000 card codes and 8 pass codes. This keypad also has a door bell key that will allow you to know if there is someone at your gate who needs to be let in. This keypad is wired only.
The Gate Crafters Proximity Card keypad operates by holding a unique proximity card over the keypad. The signal is picked up by the keypad and the gate opens. This keypad is ideal for businesses that need to allow employees in but also want a good level of security. Each proximity card is very inexpensive, which would save you from having to buy multiple transmitters. This keypad also features a party mode that will allow you to keep your gate open for however long you want.
Gate Crafters was started back in 2002 with the goal of providing our customers with high quality gate openers and accessories. We have a staff of experts standing by to answer any question you may have. Please give us a call, send us a email, or use our live chat on our website. We are available 7 days a week from 9 am to 9 pm, eastern time. We look forward to hearing from you.”
This unit is a complete solar alternative kit. Complete with stand and wire, this kit replaces the need for a 110v connection. The solar panel trickle charges the battery the same as the 110v connection. It is perfect for remote locations, long driveways, or energy conservative individuals. Solar energy is the cleanest, safest form of power available; using the sun for energy benefits the environment as well as your wallet and eliminates the concern of power outages.
The solar panel is completely weatherproof and virtually indestructible. Estate Swing's non-glass solar panels feature a clear front covering and are mounted to an anodized aluminum frame. The heart of the solar panel is the collection of solar cells, which optimizes the amount of energy absorbed even in low light situations. Each cell transforms the sunlight into energy through a photovoltaic process (converting photons into electrons). Working as a cohesive unit these cells can generate electricity that will work with solar compatible gate opener systems. As a rule of thumb; heavier gates and/or more frequent cycles (a cycle is defined as one open and closure) the more solar wattage you’ll need. Review your gate opener manual for information on which panel would best suit your needs.
*Make and model may vary from picture above.
Optimum Orientation for Solar Panels: (Your Latitude x 0.9) + 29 Degrees= # of degrees your panel should be angled towards true South from the horizontal position (laying flat pointing directly up)
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
No Power Consumption: Environmentally beneficial - collects sun's energy and creates electricity
Outdoor ready: Weatherproof, ready to be used in all conditions
10 Year Warranty: Comes with a standard 10 year warranty
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
This unit is a complete solar alternative kit. Complete with stand and wire, this kit replaces the need for a 110v connection. The solar panel trickle charges the battery the same as the 110v connection. It is perfect for remote locations, long driveways, or energy conservative individuals. Solar energy is the cleanest, safest form of power available; using the sun for energy benefits the environment as well as your wallet and eliminates the concern of power outages.
The solar panel is completely weatherproof and virtually indestructible. Estate Swing's non-glass solar panels feature a clear front covering and are mounted to an anodized aluminum frame. The heart of the solar panel is the collection of solar cells, which optimizes the amount of energy absorbed even in low light situations. Each cell transforms the sunlight into energy through a photovoltaic process (converting photons into electrons). Working as a cohesive unit these cells can generate electricity that will work with solar compatible gate opener systems. As a rule of thumb; heavier gates and/or more frequent cycles (a cycle is defined as one open and closure) the more solar wattage you’ll need. Review your gate opener manual for information on which panel would best suit your needs.
*Make and model may vary from picture above.
Optimum Orientation for Solar Panels: (Your Latitude x 0.9)+ 29 Degrees= # of degrees your panel should be angled towards true South from the horizontal position (laying flat pointing directly up)
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
No Power Consumption: Environmentally beneficial - collects sun's energy and creates electricity
Outdoor ready: Weatherproof, ready to be used in all conditions
10 Year Warranty: Comes with a standard 10 year warranty
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Unlighted button for entry or exit. Connects directly to the control board using 16 gauge stranded, low voltage, direct burial wire (not included).
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Outdoor Use: can be wired into an area unprotected from weather
Simple: simple 2 wire installation
Low cost: add as many as needed to activate your gate from multiple locations
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Outdoor plug cover to keep your transformer safe from water. All low voltage gate openers have transformers that cannot be used outdoors without covering, this product will keep your transformer covered.
Standard 2 3/4" Depth
Weatherproof Cover
Configurations include multiple combinations of:
duplex, GFCI, switch, 1 3/8" round, 1 5/8" round, 1 3/4" round, 2 1/4" round, and 2 5/8" round UL Listed
In order to accommodate transformers you will use the center two plug set-up backing (included) instead of the double gang backing.
Please note: Like most suppliers, we do NOT allow returns for electronic parts. Please make sure your item is compatible, or give us a call to make sure you get the correct product for your project. Thank you.
The Nice Apollo 1050US Control Board is a full-featured residential gate controller engineered to meet UL 325 (2018 and later) safety requirements for U.S. installations. Designed for applications where strict safety compliance is required, the 1050US mandates the use of monitored external entrapment protection devices, such as photo eyes or edge sensors, to operate.
Built for advanced customization, the 1050US offers over 100 programmable options, smooth soft open/close control, dual-gate synchronization, and integrated solar charging. This controller is ideal for residential slide and swing gate systems installed in the United States where compliance with UL 325 and ASTM F2200 safety standards is required.
Safety Notice (1050US Only)
The Nice Apollo 1050US can not operate without the required number of monitored entrapment protection devices, per UL 325 (2018) standards:
Slide Gates: Two external entrapment sensors (one per direction)
Swing Gates: Two external entrapment sensors unless no risk exists in one direction
Nice Apollo 1050i (International Version)
The Nice Apollo 1050i Control Board is an internationally focused version of the 1050 controller, designed for regions outside the United States or installations where monitored safety devices are not required. Unlike the 1050US, the 1050i does not mandate monitored photo eyes, offering greater flexibility for non-UL325 environments.
The 1050i includes a built-in LCD display, making setup, diagnostics, and troubleshooting easier across diverse international applications. With full support for dual gates, solar power, advanced programming options, and smooth gate operation, the 1050i is ideal for installers who need powerful functionality without U.S.-specific safety constraints.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Advanced residential gate controller with over 100 configurable options
Built-in solar regulator and charger with smart battery management
Supports AC or Solar installations
Adjustable soft open and soft close points
Internal 7-day programmable timer
LCD display with structured menu system
Nice BlueBUS 2-wire technology
Supports BlueBUS, pulsed, and 10K monitored entrapment devices
Plug-in receiver supports up to 1,000 rolling-code transmitters
Obstacle detection distinguishes impact vs dragging force
Programmable outputs for lights, keypads, and accessories
Protection against electric shock
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, wrenches, pliers, etc..)
Drill and assorted size bits
Hardware for mounting control box
Electrical conduits, grommets, asphalt patch, etc. as needed
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
