The Estate Swing 433 Mhz remote is compatible with:
New Apollo (only when purchased through gatecrafters.com) and Estate Swing gate openers. Existing Estate Swing openers from 2012 or newer. Any devices paired with the 433ESREC receiver.
The Estate Swing gate opener 4 button remote control is considered one of the premium remotes in comparison with current available gate openers. Featuring a range that most of the time exceeds 300 feet, the Estate Swing 4 button remote adds a new level of reliability to your gate opener system. This remote can be used from your car, motorcycle, pocket, purse and many times even from your house if it is within range (NOTE: Always make sure you can see the gate and are aware of anyone near it when activating the gate opener for safety purposes).
This transmitter is compatible with our Estate Swing Receiver that can learn up to 400 codes. Each button on this remote sends a unique code. You can learn each button to a different receiver or you can learn all four buttons to the same receiver. Each button learned to the receiver will count as one code used out of the 400 available.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive
components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation
of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Visor Clip: The visor clip is designed to slide onto most sun visors of most model cars or trucks.
Key Ring Holder: Remove the clip and add the remote to your key chain for walks or motorcyclists.
Strong Range: The remote has a range of 300 feet, with a powerful 433 MHz frequency this remote will be very reliable for entry and exit.
Learning code: With the press of a button the new remote is learned into the receiver. No need to match dip switches with old remotes.
Size: At 1/2" D x 1 1/4" W x 2" H this remote is about the same size as many automobile key chain remotes.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a
real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual
instructions for each
accessory to be installed with each gate opener.
Single Button: Operates one gate opener or garage door opener (when matching with compatible
receiver).
Note: If your gate is out of range from your garage door or multiple gate opener then a single button can be used to operate both.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we
attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are
what have led to us
having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major
impacts. We acted on
these ideas and have utilized them to help thousands of customers automate their gates.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The SOS gate horn detector offers reliable and easy access for non-security gates. Enter or exit your gate by simply honking your horn. To eliminate unintentional entry the detector comes settable to detect 1, 2 or 3 horn honks and also has a sensitivity adjustment. This works great for rural properties, gates intended for deer restriction, cattle containment, etc.
This single device eliminates the need to have an automatic exit wand on each side of the gate for unlimited automatic access or having many remotes. Eliminating the exit wands helps to keep lightening surges from reaching the control board. This also proves to be a more cost economical option because only 1 detector is needed for both entering and exiting.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Convenience: No remotes, no keypads, no opening the gate for guests, anyone can simply honk their horn and the gate will open like magic.
Easy Install: Simple 2 wire connection to trigger the gate opener. 2 wires for power 8-18 VDC.
Reliable : Other exit/entry devices have been temperamental at best because of the nature of how they work on electromagnetism: Interference is common. With the Gate Horn Detector it senses the decibels of a horn. This type of detection is difficult to interfere with and because it is not a long distance away and underground lightening surges are far less likely to be picked up and routed to your gate opener.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Words from Senior Application Engineer, Anthony Gaeto
“We are always getting questions about how gate exit wands work and how they are different from exit loops.
Exit wands are what is know as a magnetometer which senses changes in the Earth’s magnetic field. An easy way to explain how exit wands work is to picture a boat traveling through the water. As the boat is traveling it is creating waves. As your car travels through the magnetic field of the Earth it creates similar waves, like the boat. The exit wand’s magnetometer picks up on these waves as you travel by the wand. One downside of exit wands is that they do loose sight of your vehicle when it is stopped.
Gate Crafters carries 5 different types of exit wands that work very similar to each other. The only difference between these wands are some of their features. The GTO/PRO wireless exit wand is wireless between the magnetometer and receiver. The Gate Crafters exit wand is manufactured by EMX and has been around for years. The GTO exit wand is recommend for use with other GTO openers and accessories. The Estate Swing exit wand does come with a range control board that allow you to adjust the sensitivity of the magnetometer. This feature allows you tune down the range of the exit wand, so that vehicles such as a lawn mower doesn’t set open your gate, but this isn’t a complete failsafe, as it will still operate the gate opener when something is nearby. The Estate Swing Deluxe Exit wand is the most different from the other exit wands. It is constructed out of copper and features a ground cable that attach to a grounding rod that helps protect this exit wand from lightning strikes. The other 4 exit wands do not have this feature and are susceptible to damage from lightning strikes. Also the Estate Swing Deluxe Exit Wand comes with a 5 year warranty, which is longer than any other exit wand we sell.
Exit loops differ from exit wands in that they are buried in the driveway in a loop and are wire to the gate opener. The way exit loops work is that they detect the presence of metal (your car) above the loop. It does not matter if your car is moving or not, the loop will detect the car. Besides being used to exit your property, exit loops are used for safety. When exit loops are used a safety device, they will prevent your gate from closing on your car, when it detect a car nearby to your gate. The exit loop is wired to a exit loop detector, which is then wired into your gate opener’s control board.
GateCrafters.com is a one stop shop for gate openers and gate accessories at a great price. Gate Crafters was started on the idea of providing gate opener and accessories along with great customer service to our valued customers. We have technical support available to you 7 days a week from 9 am to 9 pm, eastern time. Our experts are standing by to take your phone call, answer your email, or chat with you with our live chat on our website. We welcome any question you may have and can help you put together a complete package for you so your gate operates how you want it to. We look forward to hearing from you.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
GateCrafters.com brings a special product to gate opener accessories – a Universal Digital Gate Timer. With this compact timer unit, home and business owners will be able to control
when their gate opens and closes. With several exciting features and functionalities you’ll finally be able to get the ultimate in accessibility and security that you seek out of your driveway
gate. This timer has universal application due to its 12 or 24 volt operation it can function with almost every gate opener on the market. Mount inside home/business, in a gate opener
control box or outdoor rated electrical box.
Controlled Open/Close
You can open and close your gate at a particular time with the gate timer via a programming sequence which allows you to open at a preset time and close at a preset time. The timer
allows for this to be either: weekday only, 7-days a week, single day or a combination of the three.
Inactive Accessories Function
You can make accessories like automatic entry or exit through loop or auto-sensor inactive during “off” hours. For example during evening hours some users wish to have automatic
access off to create a more secure environment. With the Universal Digital Gate Timer you can achieve this secure "off" hours setting.
Manager Opening / Auto-Reclose
This setting allows a manager to open the gate at a particular time with the gate remaining open until a preset auto-close time. Have the gate open only after an authorized individual has
activated the gate but subsequently after close at a particular time. This function works great for commercial establishments like lumber yards or car lot.
Complete Gate Lockout Times
Use this function of the timer to make the gate opener access completely disabled during off hours without shutting down the system and possibly losing programming. During evening
hours some users wish to have all access off limits through a particular gate, such as an auxiliary gate. It has built-in security because it programs the gate to not reopen at a certain period
of time but still close if already opened.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example:
easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have
the largest staff of factory trained technicians in the US.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we
attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us
having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on
these ideas and have utilized them to help thousands of customers automate their gates.