The Estate Swing 433 Mhz remote is compatible with:
New Apollo (only when purchased through gatecrafters.com) and Estate Swing gate openers. Existing Estate Swing openers from 2012 or newer. Any devices paired with the 433ESREC receiver.
The Estate Swing gate opener 4 button remote control is considered one of the premium remotes in comparison with current available gate openers. Featuring a range that most of the time exceeds 300 feet, the Estate Swing 4 button remote adds a new level of reliability to your gate opener system. This remote can be used from your car, motorcycle, pocket, purse and many times even from your house if it is within range (NOTE: Always make sure you can see the gate and are aware of anyone near it when activating the gate opener for safety purposes).
This transmitter is compatible with our Estate Swing Receiver that can learn up to 400 codes. Each button on this remote sends a unique code. You can learn each button to a different receiver or you can learn all four buttons to the same receiver. Each button learned to the receiver will count as one code used out of the 400 available.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive
components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation
of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Visor Clip: The visor clip is designed to slide onto most sun visors of most model cars or trucks.
Key Ring Holder: Remove the clip and add the remote to your key chain for walks or motorcyclists.
Strong Range: The remote has a range of 300 feet, with a powerful 433 MHz frequency this remote will be very reliable for entry and exit.
Learning code: With the press of a button the new remote is learned into the receiver. No need to match dip switches with old remotes.
Size: At 1/2" D x 1 1/4" W x 2" H this remote is about the same size as many automobile key chain remotes.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a
real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual
instructions for each
accessory to be installed with each gate opener.
Single Button: Operates one gate opener or garage door opener (when matching with compatible
receiver).
Note: If your gate is out of range from your garage door or multiple gate opener then a single button can be used to operate both.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we
attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are
what have led to us
having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major
impacts. We acted on
these ideas and have utilized them to help thousands of customers automate their gates.
The Nice Apollo MOFB Moon Photocell detector prevents gates from closing on obstacles in its path. With the latest in photocell technology, the Blue Bus communication system reveals obstacles situated on the optical axis between the transmitter and receiver. These safety components ensure children, pets, and other objects stay out of harm's way.
This advanced gate safety system is easily installed with a mere two wires, and maintenance is minimal. These photocells do not require any special work aside from checking them once every six months to evaluate their condition. The units are vertically wall-mounted.
Specifications:
Product Type
The MOFB photocell detector is for gate and door automation systems (type D according to EN standard 12453), consisting in a “TX” transmitter and “RX” receiver.
Compatibility
Works with 936 and 1050 Control Boards.
Technology Employed
TX-RX direct optical interpolation with modulated infrared ray.
Power Supply/Output
The device can only be connected to “Blue Bus” networks, from which it receives its power supply and sends output signals.
Detection Capacity
Opaque objects (larger than 50 mm) located on the optical axis between TX and RX, which move more slowly than 1.6m/s.
TX Transmission Angle
20° +/- 25%
RX Reception Angle
Approximately 20°
Useful Range
Up to 15m for a maximum TX-RX misalignment of ± 5°. The device can detect and signal an obstacle even in particularly bad weather conditions.
Maximum Range, Under Optimum Conditions
Up to 30m for a maximum TX-RX misalignment of ± 5°.
Maximum Cable Length
Up to 50.
Addressing Possibility
Up to 7 detectors with the protection function, and 2 with the opening command function. The automatic synching prevents any interference among the various detectors.
Please note: Like most suppliers, we do NOT allow returns for electronic parts. Please make sure your item is compatible, or give us a call to make sure you get the correct product for your project. Thank you.
The Nice Apollo 1050US Control Board is a full-featured residential gate controller engineered to meet UL 325 (2018 and later) safety requirements for U.S. installations. Designed for applications where strict safety compliance is required, the 1050US mandates the use of monitored external entrapment protection devices, such as photo eyes or edge sensors, to operate.
Built for advanced customization, the 1050US offers over 100 programmable options, smooth soft open/close control, dual-gate synchronization, and integrated solar charging. This controller is ideal for residential slide and swing gate systems installed in the United States where compliance with UL 325 and ASTM F2200 safety standards is required.
Safety Notice (1050US Only)
The Nice Apollo 1050US can not operate without the required number of monitored entrapment protection devices, per UL 325 (2018) standards:
Slide Gates: Two external entrapment sensors (one per direction)
Swing Gates: Two external entrapment sensors unless no risk exists in one direction
Nice Apollo 1050i (International Version)
The Nice Apollo 1050i Control Board is an internationally focused version of the 1050 controller, designed for regions outside the United States or installations where monitored safety devices are not required. Unlike the 1050US, the 1050i does not mandate monitored photo eyes, offering greater flexibility for non-UL325 environments.
The 1050i includes a built-in LCD display, making setup, diagnostics, and troubleshooting easier across diverse international applications. With full support for dual gates, solar power, advanced programming options, and smooth gate operation, the 1050i is ideal for installers who need powerful functionality without U.S.-specific safety constraints.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Advanced residential gate controller with over 100 configurable options
Built-in solar regulator and charger with smart battery management
Supports AC or Solar installations
Adjustable soft open and soft close points
Internal 7-day programmable timer
LCD display with structured menu system
Nice BlueBUS 2-wire technology
Supports BlueBUS, pulsed, and 10K monitored entrapment devices
Plug-in receiver supports up to 1,000 rolling-code transmitters
Obstacle detection distinguishes impact vs dragging force
Programmable outputs for lights, keypads, and accessories
Protection against electric shock
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, wrenches, pliers, etc..)
Drill and assorted size bits
Hardware for mounting control box
Electrical conduits, grommets, asphalt patch, etc. as needed
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
