Surge suppression is the single largest regret for gate opener customers who have a board destroyed by some seemingly insignificant power surge. Nothing can stop a direct lightning strike but small surges happen all the time. The two largest sources are residual energy from lightning nearby and power overages when the power company restores power after an outage.
This surge suppressor interrupts those surges right before they reach the control board. The surge suppressor has the capabilities for the following:
Protect 1) 24V input or output terminal
Protect 1) 12V input or output terminal
Protect 1) accessory terminal & ground - can have as many parallel accessories leading to that terminal as needed)
If you have a gate opener and one or more accessories that connect to the same terminal and that don't have power run from the opener or the power leads straight from the battery of the opener - you only need one of these.
If you have a gate opener and accessories that are powered from the control board you will need two of these. Or if you have two accessories that lead to two different terminals you will also need two of these.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Dimensions: 2.90" x 1.62" x 1.58" Weight: 0.25 lbs. Housing: ABS
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Please note: Like most suppliers, we do NOT allow returns for electronic parts. Please make sure your item is compatible, or give us a call to make sure you get the correct product for your project. Thank you.
The Nice Apollo 1050US Control Board is a full-featured residential gate controller engineered to meet UL 325 (2018 and later) safety requirements for U.S. installations. Designed for applications where strict safety compliance is required, the 1050US mandates the use of monitored external entrapment protection devices, such as photo eyes or edge sensors, to operate.
Built for advanced customization, the 1050US offers over 100 programmable options, smooth soft open/close control, dual-gate synchronization, and integrated solar charging. This controller is ideal for residential slide and swing gate systems installed in the United States where compliance with UL 325 and ASTM F2200 safety standards is required.
Safety Notice (1050US Only)
The Nice Apollo 1050US can not operate without the required number of monitored entrapment protection devices, per UL 325 (2018) standards:
Slide Gates: Two external entrapment sensors (one per direction)
Swing Gates: Two external entrapment sensors unless no risk exists in one direction
Nice Apollo 1050i (International Version)
The Nice Apollo 1050i Control Board is an internationally focused version of the 1050 controller, designed for regions outside the United States or installations where monitored safety devices are not required. Unlike the 1050US, the 1050i does not mandate monitored photo eyes, offering greater flexibility for non-UL325 environments.
The 1050i includes a built-in LCD display, making setup, diagnostics, and troubleshooting easier across diverse international applications. With full support for dual gates, solar power, advanced programming options, and smooth gate operation, the 1050i is ideal for installers who need powerful functionality without U.S.-specific safety constraints.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Advanced residential gate controller with over 100 configurable options
Built-in solar regulator and charger with smart battery management
Supports AC or Solar installations
Adjustable soft open and soft close points
Internal 7-day programmable timer
LCD display with structured menu system
Nice BlueBUS 2-wire technology
Supports BlueBUS, pulsed, and 10K monitored entrapment devices
Plug-in receiver supports up to 1,000 rolling-code transmitters
Obstacle detection distinguishes impact vs dragging force
Programmable outputs for lights, keypads, and accessories
Protection against electric shock
Gate Crafters has the resources you need. How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
Wire cutters/strippers
Basic hand tools (screwdrivers, wrenches, pliers, etc..)
Drill and assorted size bits
Hardware for mounting control box
Electrical conduits, grommets, asphalt patch, etc. as needed
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
