The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The Nice Apollo MOFB Moon Photocell detector prevents gates from closing on obstacles in its path. With the latest in photocell technology, the Blue Bus communication system reveals obstacles situated on the optical axis between the transmitter and receiver. These safety components ensure children, pets, and other objects stay out of harm's way.
This advanced gate safety system is easily installed with a mere two wires, and maintenance is minimal. These photocells do not require any special work aside from checking them once every six months to evaluate their condition. The units are vertically wall-mounted.
Specifications:
Product Type
The MOFB photocell detector is for gate and door automation systems (type D according to EN standard 12453), consisting in a “TX” transmitter and “RX” receiver.
Compatibility
Works with 936 and 1050 Control Boards.
Technology Employed
TX-RX direct optical interpolation with modulated infrared ray.
Power Supply/Output
The device can only be connected to “Blue Bus” networks, from which it receives its power supply and sends output signals.
Detection Capacity
Opaque objects (larger than 50 mm) located on the optical axis between TX and RX, which move more slowly than 1.6m/s.
TX Transmission Angle
20° +/- 25%
RX Reception Angle
Approximately 20°
Useful Range
Up to 15m for a maximum TX-RX misalignment of ± 5°. The device can detect and signal an obstacle even in particularly bad weather conditions.
Maximum Range, Under Optimum Conditions
Up to 30m for a maximum TX-RX misalignment of ± 5°.
Maximum Cable Length
Up to 50.
Addressing Possibility
Up to 7 detectors with the protection function, and 2 with the opening command function. The automatic synching prevents any interference among the various detectors.
Includes 2 rollers and a post (bolt on) for a any width gate
frame. Simply bolt the bracket onto a post adjacent to your gate
the other bracket to the provided post after it is sunk in
cement after positioning. The rollers will hug the gate frame
and keep the gate from tipping over. The bracket is made from
steel and the rollers are made of rubberized UV protected hard
plastic. Designed to stand up to the rigors of even the most
extreme climates - these rollers will last for years and are
maintenance free due to the internal sealed ball bearings.
3" tall would be for gates with a flat top, 12" tall would be
for gates that have an arch top (12" difference from trough to
crest max) so the top frame will be on the roller at all times.
GateCrafters.com is the DIY factor. GateCrafters.com
further adds to most of our gate openers for easier DIY
installation. We have developed exclusive components (example:
easy adjustable mounting brackets), customized instructions, and
offer a full spectrum of accessories to truly cover all aspects
of the installation of your gate opener. In addition we have the
largest staff of factory trained technicians in the US.
Uses 1/8 thick x 3 1/4" tall C bracket for mounting on both
sides and comes with a 3" x 3" x 8' post for second roller
Sealed ball bearings for smooth rolling.
2) rollers: 3" or 12" tall, 2 1/4" diameter
2 3/4" offset from mounting surface - can be customized by
request at no charge
GateCrafters.com has the resources you need. How do you
use your gate opener system once you get it? GateCrafters.com is
the only retailer to give a real answer to this question. We
have develop videos for installing many of our gate openers and
products and write DIY focused manuals for most gate openers and
have individual instructions for each accessory to be installed
with each gate opener.
GateCrafters.com has actual experience. We have a
testing area, we have factory and internal training courses, we
build gates and have our own gates that are automated, we
attended all industry trade shows in multiple countries and are
a member of the AFA, and we pay visits to our chosen
manufacturers' factories. All these factors are what have lead
to us having so many exclusive additions. When you see and
actually use as many products as we have you tend to have many
ideas for minor changes that have major impacts. We acted on
these ideas and have utilized them to help thousands of
customers automate their gates.
