The Oview/A display programmer is designed to program and control the automation of gates, garage doors, and road barriers. Any device within the NiceOne series that has a "BusT4" connector is compatible with this programmer.
Main features:
Program several devices connected on the same network
Control one or more automation
Enable diagnostics
Store settings and programmings (only when using the optional software)
***You may also directly connect the programmer to a device and have it wall-mounted with the 2m cable included with your purchase.
Install these optional accessory modules through the Oview software:
Bluetooth module - Connect Oview with a personal computer 10 - 15 meters apart from each other provided there are no obstacles within range (maximum distance is cut shorter in the presence of obstacles).
GSM module - Connect Oview with a personal computer, smartphone, or standard mobile phone. With this, you can send a command through call or text message as long as there is network coverage.
|
|
|
|
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
|
|
|
|
|
|
The Oview/A display programmer is only compatible with devices that have a "BusT4" connector such as the Apollo. The Nice Opera system consists of various transmitters, receivers, and control units that have that specific connector. Also, there are other software and hardware that work well with the programmer. They are the O-Box programming (transmitters and receivers), Oview programming unit (control units and receivers), a Bluetooth module, and a GSM module.
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Type: control, programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands, modification or parameters and monitoring of diagnostic data
Graphic interface: LCD display 128 x 64 dots (46 x 29 mm); 2,2”
Operator input device: joypad con 5 + 2 keys
Display/key lighting: white light
(colour coordinates: X = 0,29–0,33; Y = 0,30–0,34)
Calendar/clock: internal, with backup battery (minimum lifetime 10 years)
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Connection cable length:
- cable supplied: 2 m
- other cable: up to 700 m, measured from point to point
Power supply: supplied by devices present on BusT4
Absorbed current: Maximum 20 mA (without accessories)
Insulation: Class III
Casing protection rating: IP 20
(use indoors or in protected environments only)
Operating temperature: from –20°C to +55°C
Dimensions (mm): 107 x 61 x h 20
(with wall-mounting support: 125 x 70 x h 32)
Weight: 75 g (without cable)
Go back to related product list |
