Related Product List:
|
|
|
|
Nice Apollo 7251 Commercial Post Mount Single Slide Gate Opener with Free DIY Kit
34240,24588,35102
Related Product Detail:
 |
|
|
Gate Crafters Universal Digital Gate Timer is compatible with: Estate Swing 24V gate openers, LiftMaster LA400.
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
|
|
|
|
|
|
|
GateCrafters.com brings a special product to gate opener accessories – a Universal Digital Gate Timer. With this compact timer unit, home and business owners will be able to control
when their gate opens and closes. With several exciting features and functionalities you’ll finally be able to get the ultimate in accessibility and security that you seek out of your driveway
gate. This timer has universal application due to its 12 or 24 volt operation it can function with almost every gate opener on the market. Mount inside home/business, in a gate opener
control box or outdoor rated electrical box.
Controlled Open/Close
You can open and close your gate at a particular time with the gate timer via a programming sequence which allows you to open at a preset time and close at a preset time. The timer
allows for this to be either: weekday only, 7-days a week, single day or a combination of the three.
Inactive Accessories Function
You can make accessories like automatic entry or exit through loop or auto-sensor inactive during “off” hours. For example during evening hours some users wish to have automatic
access off to create a more secure environment. With the Universal Digital Gate Timer you can achieve this secure "off" hours setting.
Manager Opening / Auto-Reclose
This setting allows a manager to open the gate at a particular time with the gate remaining open until a preset auto-close time. Have the gate open only after an authorized individual has
activated the gate but subsequently after close at a particular time. This function works great for commercial establishments like lumber yards or car lot.
Complete Gate Lockout Times
Use this function of the timer to make the gate opener access completely disabled during off hours without shutting down the system and possibly losing programming. During evening
hours some users wish to have all access off limits through a particular gate, such as an auxiliary gate. It has built-in security because it programs the gate to not reopen at a certain period
of time but still close if already opened.
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example:
easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have
the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
|
4 Uses (see list above)
16 Events and 15 daily program combinations
12,24 or 120 Volt Power Supply option
Memory backup incase of power failure
DIN rail mount
Product dimensions: 3.5” high, 1.5” wide, 2.75” depth
24VDC compatible power
Draw when active: 20 Milliamps
Draw when inactive: less than 10 milliamps
One year limited warranty
|
|
|
|
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
|
|
|
|
|
|
|
Go back to related product list |
 |
|
|
The Nice Apollo MOFB Moon Photocell detector prevents gates from closing on obstacles in its path. With the latest in photocell technology, the Blue Bus communication system reveals obstacles situated on the optical axis between the transmitter and receiver. These safety components ensure children, pets, and other objects stay out of harm's way.
This advanced gate safety system is easily installed with a mere two wires, and maintenance is minimal. These photocells do not require any special work aside from checking them once every six months to evaluate their condition. The units are vertically wall-mounted.
Specifications:
- Product Type
The MOFB photocell detector is for gate and door automation systems (type D according to EN standard 12453), consisting in a “TX” transmitter and “RX” receiver.
- Compatibility
Works with 936 and 1050 Control Boards.
- Technology Employed
TX-RX direct optical interpolation with modulated infrared ray.
- Power Supply/Output
The device can only be connected to “Blue Bus” networks, from which it receives its power supply and sends output signals.
- Detection Capacity
Opaque objects (larger than 50 mm) located on the optical axis between TX and RX, which move more slowly than 1.6m/s.
- TX Transmission Angle
20° +/- 25%
- RX Reception Angle
Approximately 20°
- Useful Range
Up to 15m for a maximum TX-RX misalignment of ± 5°. The device can detect and signal an obstacle even in particularly bad weather conditions.
- Maximum Range, Under Optimum Conditions
Up to 30m for a maximum TX-RX misalignment of ± 5°.
- Maximum Cable Length
Up to 50.
- Addressing Possibility
Up to 7 detectors with the protection function, and 2 with the opening command function. The automatic synching prevents any interference among the various detectors.
- Protection Class For Casing
IP55
- Operating Temperature
-20°C ÷ +55°C
- Dimensions
69 x 78 x 25 mm
- Weight
50g
Go back to related product list |
 |
|
The Oview/A display programmer is designed to program and control the automation of gates, garage doors, and road barriers. Any device within the NiceOne series that has a "BusT4" connector is compatible with this programmer.
Main features:
Program several devices connected on the same network
Control one or more automation
Enable diagnostics
Store settings and programmings (only when using the optional software)
***You may also directly connect the programmer to a device and have it wall-mounted with the 2m cable included with your purchase.
Install these optional accessory modules through the Oview software:
Bluetooth module - Connect Oview with a personal computer 10 - 15 meters apart from each other provided there are no obstacles within range (maximum distance is cut shorter in the presence of obstacles).
GSM module - Connect Oview with a personal computer, smartphone, or standard mobile phone. With this, you can send a command through call or text message as long as there is network coverage.
|
|
|
|
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this
question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each
accessory to be installed with each gate opener.
|
|
|
|
|
|
The Oview/A display programmer is only compatible with devices that have a "BusT4" connector such as the Apollo. The Nice Opera system consists of various transmitters, receivers, and control units that have that specific connector. Also, there are other software and hardware that work well with the programmer. They are the O-Box programming (transmitters and receivers), Oview programming unit (control units and receivers), a Bluetooth module, and a GSM module.
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
|
|
|
|
|
Type: control, programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands, modification or parameters and monitoring of diagnostic data
Graphic interface: LCD display 128 x 64 dots (46 x 29 mm); 2,2”
Operator input device: joypad con 5 + 2 keys
Display/key lighting: white light
(colour coordinates: X = 0,29–0,33; Y = 0,30–0,34)
Calendar/clock: internal, with backup battery (minimum lifetime 10 years)
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Connection cable length:
- cable supplied: 2 m
- other cable: up to 700 m, measured from point to point
Power supply: supplied by devices present on BusT4
Absorbed current: Maximum 20 mA (without accessories)
Insulation: Class III
Casing protection rating: IP 20
(use indoors or in protected environments only)
Operating temperature: from –20°C to +55°C
Dimensions (mm): 107 x 61 x h 20
(with wall-mounting support: 125 x 70 x h 32)
Weight: 75 g (without cable)
Go back to related product list |
|