The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) is compatible wired with: All gate openers for 24-volt gate openers a 12-volt transformer will be needed (not included)
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9 am - 9 pm EST 7 days a week.
The Estate Swing 433 MHz 2 Channel Receiver (433ESREC) has the ability to control two separate devices or two different relays on a control board and can learn up to 400 codes. The typical situation for the receiver controlling two devices in a 3 car garage. Usually, there are 2 separate garage door openers in this type of garage and you can utilize the one receiver to control each one of them with a separate button on the remote. Another option for using the two relays on the receiver is controlling two separate terminals on a single gate opener. Many times gate openers will have a terminal for an automated open and close and another terminal for partial opening or open only during re-closing without stopping. A second button on the remote could be used to control this second function.
This receiver is also a plug-in receiver for Estate Swing gate openers. Please see the drop-down options.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition, we have the largest staff of factory trained technicians in the US.
Easy Wiring: There are 4 or 6 wires that you need to connect depending on if you are using 1 or 2 channels. Two are for power, which can be AC or DC 12-24V. If you cannot find a power source (most gate openers have a battery you can run it off of) then you can hook it up to a transformer. (Search your junk drawers, many old transformers from other electronics may fall within the generous range allowed by our receiver). The other two wires close a circuit. On a garage door simply find the two terminals that the wall mount button uses.
Strong Range: This is one of the best features of this receiver. The range is rated at 300 feet but many times it can exceed this.
Learn Button Programming: Simply press the learn button on the receiver. A light comes on. Then press the button on the remote you wish to use and the light blinks and turns off. Done! Repeat with other remotes or buttons. This receiver can learn up to 400 remotes
Versatility: Because of the simplicity of the receiver, it can be used to just about any purpose. On Estate Swings there is a second open command terminal for partial openings, you can use this receiver to allow a dual button remote to open your gate fully or partially. On Apollos and GTOs, there are open only terminals, you can use this receiver to create safer automation for multiple remote control users by only allowing them to open the gate and letting auto-close close the gate - great for condos and other public entrances so they cannot accidentally reverse the gate on another car. For any accessories that are not wireless you can use the 433UNIADP 433 MHz adapter paired up with this receiver to make it a wireless device. In addition to all that, it has both a normally open and normally closed connection, allowing it to either open a circuit or close a circuit wirelessly - we have had hundreds of customers that came up with many other great uses for this device.
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
433ESRec: Standard receiver - ready to wire into any system.
433ClipESRec12: Comes with plug in clip for ES 1000D and H gate openers
433ClipESRec12C: Comes with plug in clip for ES 300, ES 302, ES 500, ES 502, ES 400, ES 402, ES 1100, ES 1102, ESC 1102, ESL1200 gate openers
433ClipESRec24: Comes with plug in clip for ES 1600, ES 1602, ESC 1600, ESC 1602, ESU 2200, ESU 2202, ESL 1800, ESL2000 gate openers
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
This system has one station at the door/gate and has the option
of one or two master station(s) in the house.
The classic intercom is a simple as it gets, and with simplicity comes
reliability. From the door/gate station you will run a 2 conductor wire
to the indoor station(s) and from the indoor station(s) you will run a
2 conductor wire to the gate. The gate/door release button is active
all the time; it can be used anytime to open the gate, not just when
someone calls in. Talk to your guest and open the gate with 2
buttons... simplicity.
Package Contents:
One or two (1/2-depending on option selected) C-ML/A master station
for the house
One (1) C-D door/gate station
Packet of screws
Installation and Operation Manual
GateCrafters.com is the DIY factor. GateCrafters.com further
adds to most of our gate openers for easier DIY installation. We have
developed exclusive components (example: easy adjustable mounting
brackets), customized instructions, and offer a full spectrum of
accessories to truly cover all aspects of the installation of your gate
opener. In addition we have the largest staff of factory trained
technicians in the US.
Open voice door answering with door release control.
Communication volume control.
System automatically turns off in 15 seconds.
Battery (4 "C") or DC (SKK-620) powered.(Batteries or Power Supply
NOT included)
Max Distance 490' with 18 AWG
2 conductor, non-polarized wiring between door and master station
(with separate 2 conductor wiring for door release)
GateCrafters.com has the resources you need. How do you use
your gate opener system once you get it? GateCrafters.com is the only
retailer to give a real answer to this question. We have develop videos
for installing many of our gate openers and products and write DIY
focused manuals for most gate openers and have individual instructions
for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area,
we have factory and internal training courses, we build gates and have
our own gates that are automated, we attended all industry trade shows
in multiple countries and are a member of the AFA, and we pay visits to
our chosen manufacturers' factories. All these factors are what have
lead to us having so many exclusive additions. When you see and
actually use as many products as we have you tend to have many ideas
for minor changes that have major impacts. We acted on these ideas and
have utilized them to help thousands of customers automate their gates.
The LEM-1DLS Access Sentry system is an audio door answering and door release system for residential and business use. The set includes one or two (depending on option selected) desk or wall mount master station, a surface mount door station, and an AC transformer to power the system.
The voice volume and the incoming call tone volumes are adjustable at the master station. The door release button is designed to activate a gate opeenr or electric strike or can be modified in the field to work with a magnetic lock.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
2 conductor, non-polarized wiring between door and master station (with separate 2 conductor wiring for door release)
Max Distance 1600' with 18 AWG
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The Estate Swing Wireless Video Intercom is compatible with: All gate openers.
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
Accessory Uses
The Estate Swing Wireless Video Intercom will add an additional level of security to your front gate or door. This is a solar friendly opener accessory. In the standby the door camera ill only pull about 17 mA and will generally remain in standby as it is only activated when a call is being made. The Estate Swing Wireless Video Intercom allows you to record video as well as take a photo of whoever is seeking access to your property. The video monitor will store these video clips and photos on the included Micro SD card. You can also customize the indoor monitor unit with your own music and wallpaper images.
The included gate/door bell camera, is a color camera with built-in LED lights to allow you to continue this video intercom at night. The 2.4 GHz signal will provide for an ample distance between the camera and the base station. The Estate Swing Wireless Video Intercom has a range capability of up to 300ft with a clear line of sight.
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
Accessory Features
GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
Words from Senior Application Engineer, Anthony Gaeto
"Estate Swing is always on the cutting edge when bring new products to the market, and the new Wireless Video Intercom System is testament to that. The ability to record the guests who come to your property can be a valuable asset when dealing with unwanted guests. The removable Micro SD card slot allows you to transfer photos and videos between your computer and video intercom system. Stay tuned for an in-depth video going over all of the great features this video intercom has."
Accessory Options
None.
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
