Related Product List:
|
|
|
|
Estate Swing E-S 1602 Heavy Duty Automatic Gate Opener for Driveways Dual Swing with Free Extra Remote
31741,985,3821,985,985,36139
Related Product Detail:
 |
|
The Estate Swing 433 MHz 2-Channel Receiver (433ESREC) can control two separate devices or two different relays on a control board and can learn up to 400 codes. A common application is using the receiver to control two devices in a three-car garage. Typically, this type of garage has two separate garage door openers, and a single receiver can be used to control both, with each door operated by a separate button on the remote.
Another option is using the two relays to control two separate terminals on a single gate opener. Many gate openers include one terminal for automated open and close functions and another terminal for partial opening or an open-only function during re-closing without stopping. In this setup, a second button on the remote can be used to control the additional function.
This receiver is also available as a plug-in receiver for Estate Swing gate openers.
Gate Crafters offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
- Compatible with all 24-volt gate openers when wired. (Will require a 12-volt transformer - NOT INCLUDED)
Easy Wiring:
There are four or six wires to connect, depending on whether you are using one or two channels. Two wires are for power, which can be AC or DC (12 - 24V). If you cannot locate a power source, most gate openers have a battery you can tap into, you can connect the receiver to a transformer. (Check your junk drawer; many old transformers from other electronics may fall within the generous voltage range supported by this receiver.)
The remaining two wires are used to close a circuit. On a garage door opener, simply locate the two terminals used by the wall-mounted control button.
Strong Range:
This is one of the standout features of this receiver. The rated range is 300 feet, and in many cases, it can exceed that distance.
Learn Button Programming:
Programming is quick and simple. Press the learn button on the receiver until the indicator light turns on. Then press the button on the remote you wish to use. The light will blink and turn off, programming is complete. Repeat this process for additional remotes or buttons. The receiver can learn up to 400 remotes.
Versatility:
Thanks to its simple design, this receiver can be used for a wide variety of applications. On Estate Swing gate operators, there is a second open-command terminal for partial openings. This receiver allows a dual-button remote to control both full and partial gate openings.
On Apollo and GTO gate operators, which feature open-only terminals, this receiver can be used to create safer automation for multiple remote users by allowing them to open the gate while auto-close handles closing. This is ideal for condos and other public entrances, as it prevents users from accidentally reversing the gate into another vehicle.
For accessories that are not wireless, the 433UNIADP 433 MHz adapter can be paired with this receiver to convert them into wireless devices. Additionally, the receiver offers both normally open and normally closed connections, allowing it to either open or close a circuit wirelessly. Over time, hundreds of customers have found many creative and practical uses for this device.
Gate Crafters has the resources you need.
How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
- Frequency: 433 MHz
- Channels: 2
- Memory Capacity: Up to 400 remote codes
- Operating Range: Rated up to 300 feet
- Power Input: 12 - 24V AC or DC
- Wiring:
- 4 wires (single channel)
- 6 wires (dual channel)
- Relay Type: Normally Open (NO) and Normally Closed (NC)
- Model Number: 433ESREC
- (1) Estate Swing 433 MHz 2 Channel Receiver (433ESREC)
For over a decade, Gate Crafters has been the premier online retailer of gate openers and accessories. With our extensive technical and installation expertise, we are authorized to serve the DIY market. We believe customers should have the opportunity to take pride in their projects, whether installing or troubleshooting a gate opener. Everyone deserves the option to enjoy high-quality products without the need to hire help.
At Gate Crafters, we empower you to install confidently by providing access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to DIY your gate opener system, you can save thousands of dollars over its lifetime while gaining valuable knowledge about your installation and how the system operates. This understanding will make it easier to troubleshoot any issues and perform routine maintenance in the future.
Gate Crafters is the DIY factor.
Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
Go back to related product list |
 |
|
The Ditek Control Board Surge Protector (DTK-4LVLP-CR) is compatible with:
- GTO: SW2000XL, SW2002XL, SW2500, SW2502, SW3000XL, SW3002XL, SW4000XL, SW4002XL, GPSW050, GPSW100, GPSW052, GPSW102, SL1000, SL1002, SL2000, SL2002, GPSL050, GPSL052, GPSL100, GPSL102, old Pro 1000/1002 & 2000/2002
- Mighty Mule: FM 200, FM350, FM352, FM500, FM502, old FM700 & FM702
- Estate Swing: E-S 300, E-S 302, E-S 500, E-S 502, E-S 1100, E-S 1102, E-SC 1102, E-S 1600, E-S 1602, E-SC 1600, E-SC 1602, E-SU 2200, E-SU 2202, E-S 450, E-SL 1200, E-SL 1800, E-SL 2000AC
- Apollo: 1500, 1600, 1550, 1650, 3500ETL, 3600ETL, 7000UL, 7500ETL, BA-12
- Zareba: G450, G452, G550, G552, G750, G752
- Most other gate openers
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.
|
|
|
|
|
|
Surge suppression is the single largest regret for gate opener customers who have a board destroyed by some seemingly insignificant power surge. Nothing can stop a direct lightning strike but small surges happen all the time. The two largest sources are residual energy from lightning nearby and power overages when the power company restores power after an outage.
This surge suppressor interrupts those surges right before they reach the control board. The surge suppressor has the capabilities for the following:
Protect 1) 24V input or output terminal
Protect 1) 12V input or output terminal
Protect 1) accessory terminal & ground - can have as many parallel accessories leading to that terminal as needed)
If you have a gate opener and one or more accessories that connect to the same terminal and that don't have power run from the opener or the power leads straight from the battery of the opener - you only need one of these.
If you have a gate opener and accessories that are powered from the control board you will need two of these. Or if you have two accessories that lead to two different terminals you will also need two of these.
|
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
 |
|
|
The Aiphone Classic Voice Intercom System is compatible with: All gate openers
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. We
have live application specialists available 9am - 9 pm EST 7 days a
week.
|
|
|
|
|
|
This system has one station at the door/gate and has the option
of one or two master station(s) in the house.
The classic intercom is a simple as it gets, and with simplicity comes
reliability. From the door/gate station you will run a 2 conductor wire
to the indoor station(s) and from the indoor station(s) you will run a
2 conductor wire to the gate. The gate/door release button is active
all the time; it can be used anytime to open the gate, not just when
someone calls in. Talk to your guest and open the gate with 2
buttons... simplicity.
Package Contents:
- One or two (1/2-depending on option selected) C-ML/A master station
for the house
- One (1) C-D door/gate station
- Packet of screws
- Installation and Operation Manual
|
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further
adds to most of our gate openers for easier DIY installation. We have
developed exclusive components (example: easy adjustable mounting
brackets), customized instructions, and offer a full spectrum of
accessories to truly cover all aspects of the installation of your gate
opener. In addition we have the largest staff of factory trained
technicians in the US.
|
|
|
|
|
|
|
|
Replacement Limit Switches for the Estate Swing E-S 1600/1600L Swing gate Openers. A limit switch plays a crucial role in regulating the extent to which your gate opens and closes. Essentially, this switch acts as a signal transmitter to the motor, indicating when it should stop moving the gate. If the limit switch becomes faulty or breaks, the motor will not receive the necessary signals from the cam or lever, potentially leading to the gate moving beyond its intended range. This can result in significant damage to the gate itself, the supporting posts, and the surrounding area. To avoid such issues and ensure smooth operation, it is vital to select the correct limit switch that is compatible with your specific gate opener make and model. Choosing the appropriate limit switch helps to ensure reliable functionality and minimizes the risk of malfunctions, which can otherwise lead to costly repairs and operational problems. GateCrafters.com offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
The E-S 1600 Operator uses the 350mm Stroke Length Limit Switch
The E-S 1600L Operator uses the 540mm Stroke Length Limit Switch
(Based on your selection) E-S 1600 - (2) Limit Switches (attached to 350mm wire) E-S 1600L - (2) Limit Switches (attached to 540mm wire) GateCrafters.com has the resources you need.
How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener. |
For over a decade GateCrafters.com has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future. |
GateCrafters.com is the DIY factor.
GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US. |
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
GateCrafters.com has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
- Philips Screwdriver
- 2mm Hex Wrench
- 3/16 Hex Wrench
- 1/16 in. Flathead Screwdriver
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details. |
Go back to related product list |
|
| |
 |
|
|
|
Customer Service:1-800-997-6649 | Local:813-920-7259 (EST 9:00am-5:00pm)
|
| |
