Intercoms with built-in receivers, models RE-1, RE-2, AE 500. Keypad with built-in receiver, MDKP. Devices equipped with AP-4, AP-5, MDR series, and MGR series receivers.

These remotes are used to activate linear products remotely. The linear products will, in turn, activate the gate opener. The reason for not activating the gate opener directly is some people like the security of the Mega-Code remote. Others like the features of some of the linear products. For example, the AP-5 has 2 relays and can delete one remote without having to change the others. The RE-1 and RE-2 can do that as well and also keep a log of remotes used to enter. Linear’s MegaCode® series of digital transmitters are wireless radio controls designed for use with MegaCode format receivers. The MegaCode radio format provides unparalleled security. Each transmitter is pre-set at the factory to one of over 1,000,000 codes.

For over a decade GateCrafters.com has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future.

The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.

Please refer to the Installation Manual for Tools Needed.

Be the first to write a testimonial for this product. Please send them to Testimonials@GateCrafters.com.

The Estate Swing 433 MHz transmitter module is a very unique product that can make almost any accessory into a wireless accessory. This transmitter module has two activation wires. For any accessory that normally gets wired into a gate opener that simply momentarily closes a dry contact (which is just about any keypad, loop detector, exit wand, push button, or photocell) simply wire the two activation wires into the terminals or wires that normally lead back to the gate opener for activation. When the accessory relay triggers closing the dry contact the transmitter is activated and send a wireless signal to the receiver on the gate opener just like a remote would. Please note with the accessory you are making wireless with this device: you will still need to plan to power your accessory - some accessories can run off batteries and some cannot. Please be aware that you may need to run some lines from a power source to your accessory even if you are converting its triggering of the gate opener to wireless.

The transmitter module is small in size and can fit into the housings of many different accessories. It is 2 1/2 x 1 1/4 x 1/4 inches and connects to a 9V battery. For those devices that cannot fit this transmitter module into its housing, we have an option with a very small plastic box to mount near the accessory.

Convenience is the first thing that comes to mind for most when deciding to convert an accessory to wireless. It is an easier installation when you do not have to run wires 40 or 50 feet to your keypad or another accessory. It can also save you money as the wire is one of those installation materials whose cost can add up quickly depending on the footage needed. There is another advantage to wireless, however. The more wires you have running underground and leading to the control board of the gate opener the higher your power surge/lightning risks become. Transient voltage carries through the ground during a lightning storm and can be picked up by wires running through the ground. If you have many wires tied back to your gate opener control board you are increasing your chances of having to replace a very expensive component of your gate opener system.

	GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have developed videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.

• Module Only: This is just the module without a housing. You will need to insert this into the housing of the accessory and provide a 9 volt battery.


• Module w/ Housing: This is a package with the transmitter module and a plastic housing box for the module and the battery. You will need to provide a 9 volt battery, a dab of caulk, a screw appropriate for the material you are mounting the box too, and possibly additional wire depending how far you are mounting the transmitter module from the accessory.

	GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own automated gates, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.

GateCrafters.com brings a special product to gate opener accessories – a Universal Digital Gate Timer. With this compact timer unit, home and business owners will be able to control when their gate opens and closes. With several exciting features and functionalities you’ll finally be able to get the ultimate in accessibility and security that you seek out of your driveway gate. This timer has universal application due to its 12 or 24 volt operation it can function with almost every gate opener on the market. Mount inside home/business, in a gate opener control box or outdoor rated electrical box.

Controlled Open/Close
You can open and close your gate at a particular time with the gate timer via a programming sequence which allows you to open at a preset time and close at a preset time. The timer allows for this to be either: weekday only, 7-days a week, single day or a combination of the three.

Inactive Accessories Function
You can make accessories like automatic entry or exit through loop or auto-sensor inactive during “off” hours. For example during evening hours some users wish to have automatic access off to create a more secure environment. With the Universal Digital Gate Timer you can achieve this secure "off" hours setting.

Manager Opening / Auto-Reclose
This setting allows a manager to open the gate at a particular time with the gate remaining open until a preset auto-close time. Have the gate open only after an authorized individual has activated the gate but subsequently after close at a particular time. This function works great for commercial establishments like lumber yards or car lot.

Complete Gate Lockout Times
Use this function of the timer to make the gate opener access completely disabled during off hours without shutting down the system and possibly losing programming. During evening hours some users wish to have all access off limits through a particular gate, such as an auxiliary gate. It has built-in security because it programs the gate to not reopen at a certain period of time but still close if already opened.

	GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.